Will this spoiler fit without drilling new holes?
Will this spoiler fit without drilling new holes?
I know I'll probably be flamed for this one, but I'm thinking of putting this camaro spoiler on. Aero wings are just too damn much. My original one shattered
I just have the base model firebird spoiler on now

I think this spoiler MIGHT look ok with my 91 t/a ground effects
Basically I don't want to drill any holes in my trunk lid. Will this spoiler fit without drilling new holes? I have a base model firebird spoiler on there now .Also, what type / year of camaro is this off. I know someone here with a GTA has this on his car.
------------------
91 Formula 1LE 1 of 46
305 TPI 5speed
1LE/G92/WS6
Paxton SN92 supercharger, Ford SVO 24#injectors, Crane AFPR,SLP airfoil, ported/polished plenum, March alt. pulley,Crane Gold 1.6rrs,MSD coil,MSD6AL (5400rpm limit),Holley 9mm wires,Ac delco R43ts plugs,custom chip,Bosch O2sensor,SLP 1 5/8" headers,SLP catback,shortened shifter,3:73s w/Auburn posi,180* t-stat,JET 195* fan switch, Macewen white face gauges, Autometer gauges, Zoom hi-performance clutch.
[This message has been edited by theformula (edited April 05, 2001).]
I just have the base model firebird spoiler on now

I think this spoiler MIGHT look ok with my 91 t/a ground effects
Basically I don't want to drill any holes in my trunk lid. Will this spoiler fit without drilling new holes? I have a base model firebird spoiler on there now .Also, what type / year of camaro is this off. I know someone here with a GTA has this on his car.
------------------
91 Formula 1LE 1 of 46
305 TPI 5speed
1LE/G92/WS6
Paxton SN92 supercharger, Ford SVO 24#injectors, Crane AFPR,SLP airfoil, ported/polished plenum, March alt. pulley,Crane Gold 1.6rrs,MSD coil,MSD6AL (5400rpm limit),Holley 9mm wires,Ac delco R43ts plugs,custom chip,Bosch O2sensor,SLP 1 5/8" headers,SLP catback,shortened shifter,3:73s w/Auburn posi,180* t-stat,JET 195* fan switch, Macewen white face gauges, Autometer gauges, Zoom hi-performance clutch.
[This message has been edited by theformula (edited April 05, 2001).]
that's off an 88 sport coupe if I remember right. I'm doubting it will fit, I'm pretty sure it has different bolt spacing than the one you have, but see if you can find one at a junk yard and you can measure
Member
Joined: Feb 2000
Posts: 322
Likes: 0
From: San Antonio, Tx
Car: 2001 Camaro Z28/1995 Camaro Z28
Engine: just a little 5.7(LS1-320/340 RW)
Transmission: SMOOOOOOTH T-56/Auto. . .
Axle/Gears: 3.42 and 2.73
86ZRichie is correct...THAT IS AN 88 SC wing!
I have one myself and it would require drilling for you. the holes don't line up perfectly.
it is also a low profile wing(i like both) in case you didn't know...here is what it looks like on the back of a Camaro for your info...
I have one myself and it would require drilling for you. the holes don't line up perfectly.
it is also a low profile wing(i like both) in case you didn't know...here is what it looks like on the back of a Camaro for your info...
no, it's an '88 sport coupe spoiler. I agree w/ duffster, as I have a '88 sport coupe.
here's a side shot and a rear shot of what the spoiler looks like.
------------------
1988 Camaro Sport Coupe
2.8 V6, TCI 3200 Stall TC, B&M Transkit, 80 Series Flowmaster w/ Catback, '85 Firebird SE 3.73 Rear (soon)
'83 CFI Z/28 Hood, '87 16" IROC Wheels on Kumho Ecsta Supra 712's, '92 Z/28 Bowtie Grille
IROC Gauges, IROC Taillights, IROC Foglamps w/ retrofitted 9005 hi-beam headlight bulbs
1985 Firebird SE
2.5 I4, T-5, 3.73 rear (going to the sport coupe)
Beat to a pulp.
here's a side shot and a rear shot of what the spoiler looks like.
------------------
1988 Camaro Sport Coupe
2.8 V6, TCI 3200 Stall TC, B&M Transkit, 80 Series Flowmaster w/ Catback, '85 Firebird SE 3.73 Rear (soon)
'83 CFI Z/28 Hood, '87 16" IROC Wheels on Kumho Ecsta Supra 712's, '92 Z/28 Bowtie Grille
IROC Gauges, IROC Taillights, IROC Foglamps w/ retrofitted 9005 hi-beam headlight bulbs
1985 Firebird SE
2.5 I4, T-5, 3.73 rear (going to the sport coupe)
Beat to a pulp.
Trending Topics
Hey, thats my gray camaro hehe.
The spoiler is about 3 1/2" tall.
I've thought about going to a 91-92 Z28 style but the smaller one looks pretty good and you don't see too many camaros with that specific spoiler.
------------------
EVILFACE
88 Camaro
Stock 305 TBI Auto,Flowmaster, Full 3" Exhaust, B&M Megashifter
Runs A Blistering 16.5 @ 81.5 mph
http://www.evilface.com/evilscamaro.htm
The spoiler is about 3 1/2" tall.
I've thought about going to a 91-92 Z28 style but the smaller one looks pretty good and you don't see too many camaros with that specific spoiler.
------------------
EVILFACE
88 Camaro
Stock 305 TBI Auto,Flowmaster, Full 3" Exhaust, B&M Megashifter
Runs A Blistering 16.5 @ 81.5 mph
http://www.evilface.com/evilscamaro.htm
Thread
Thread Starter
Forum
Replies
Last Post





