so what sould be the totally cost for a professional shop to shave door handles

 

Well, why don't you bust out your yellow pages and call some professional shops and ask?? Spoonfeeding is not an option around here.

S.

 

Well thanks for your help **** head. I was just trying to see if the people that i called were overpriceing me.

 

Yeah, thats the way to get a good rep on the board. Call people a **** head. You have now gained all my respect.

------------------
1992 Camaro RS
305ci automatic, all stock til I get some cash.
My 1992 RS

 

okay ****face screw you because he was being a ****

 

Calm down dude...what they are trying to get over to you is if you search this question comes up about every tuesday...and i called a few local body shops...to get the thing taken off..and a plate welded in...then to have it made to look good (sanding and bondo)remember this doesnt include installing poppers or painting the mark it leaves... they said it would drop me back about 300$s...(that was from two shops that i only knew by rep)..and a guy i know who owns a shop said it would only set me back 150$...
Snuffit.
p.s. the two guys you so thankfully refered to as **** heads happen to be some of the smartest and most helpful guys on this board...think before you speak please

 

Well you're welcome d:ckh0le. How many did you call? Were they all in the same ballpark? What are you going to do if you think they ARE overcharging you? Go out of state? Take 'em to court? Start up your own auto shop? You take what you get and where you are determines what you get.

Mine cost me $100 - Snuff's cost around $300, I've read of guys paying $600 - does that help?! Better? Here's a healthy spoonful of PLONK - hope you enjoy it. Friggin new guys.

Steve

 

What does it mean to shave door handles? I have never heard of that before, what is it? Does anyone have any pictures? Thanks.

------------------

1988 Carmaro RS

Bustit.Org

To see more pictures of my camaro, go to Bustit.Org and click on the About me page!
GTS Black outs for front
GTS Black outs for back
LeBra bra
K & N air filter
Flowmaster 80 series with Edelbrock Chrome tips

 

shaved handles or any other part you hear shaved with means to take that part out and fill or smoth out the pannel to make it look like there was never anything there. To do door handles you need a system like keyless entry to activate the door opening mechanisam to open the door and you need popers which is a spring loaded device that will push the door open the door so that it dosn't latch when the button is pushed. hope that explans it if you need to see a pic go to the local mag rack and look at truckin mag theyr will be about a million trucks in there that will have shaved parts.

 

It sounded like a valid question to me. ALL of the info on this board can be obtained from other sources. (Yet no where else has all this info.) I'd also be offended if I asked a valid question and got a 'smart' reply.

 

editors note: Sorry all, I missed this post.



[This message has been edited by RCR (edited May 25, 2001).]

 

Damn whats wrong wiht him, even after he cursed off tweo people, somebody actually answered his posts ans STILL he is pissed off at someone. Go figure

-Max

 

Too much crank.

------------------
1986 WS6-Equipped 5.0 TPI Trans Am
Random Tech High-Flow Cat
Two Chamber Flowmaster Muffler
Megs Custom 4.5" Stainless Steel Rolled Tips
1999 Grand Am GT In-Dash CD Player w/Equalizer(fits like '86 original)
5% Tint On Rear, 35% On Sides
http://www.pitt.edu/~zyhst/trans86/

OTHER RIDE:
1998 C5 6Spd. Corvette Coupe
Silver w/Gray Leather Int.
12/14 Options
Stock(for now)
Best 1/4th: 13.5 @ 104.4MPH

 

so eat ****

 

- editor: what a smart guy

[This message has been edited by RCR (edited May 25, 2001).]

 

This guy is obviously never gonna get the hint, that we don't treat members on the board this way. Can't the moderator like suspend him or kick him off the board. He is a junior member.

 

This guy has to be 16 and just got his permit the way he acts,i think he needs a spanking,what a punk,i could see him getting offended a little but his reaction shows his immaturity,and fast-as-fuc,if you dont need any help from us a$$holes then why did you ask?

------------------
www.rearman.com/camarokid.htm

If it aint a V-8 that $hit aint fast!,unless its a GN,lol!

305 tpi,700r-4 with shift kit,My mods are minimal,just a bunch of little $hit.Anyone know where to get underdrive pulleys for a v-belt set up?

 

I love computer thugs,lol.

------------------
www.rearman.com/camarokid.htm

If it aint a V-8 that $hit aint fast!,unless its a GN,lol!

305 tpi,700r-4 with shift kit,My mods are minimal,just a bunch of little $hit.Anyone know where to get underdrive pulleys for a v-belt set up?

 

Hey now, I'm 16 and I don't go yelling at everyone around here. And fast: Next time you ask a question, hopefully you get no response because you don't need our help. Grow up.

------------------
1992 Camaro RS
305ci automatic, all stock til I get some cash.
My 1992 RS

 

yeah really dont go bashing 16yr olds...i happen to be 16...well for another three months anyway....and fast....grow up...

 

Yeah whats wrong with 16 year olds?, I used to be one many ,many, many years ago. LOL

 

Yea what IS wrong with 16 year olds? i was one 7 days ago...

------------------
1989 Firebird
2.8 v6, t5 swapped in

Ram Hi-po clutch, Cold Air, 1.6 rockers,Lakewood LCA's, Lakewood Lift bars, Wonder Bar, 3" y-pipe, Random Tech Cat, 3" I-pipe, Flowmasters, MSd 6a, MSD Coil (Fireball in future) Accel 8.8 wires, MSD Ignition Module, Auto Meter Gauges (Water, Clock (needed one) Fuel Pressure, and 5" monster tach) 4th Gen Seats


" I'd rather run last in a full out race, than to NOT run at all ".

 

Editor: yeah yeah...blah blah

[This message has been edited by RCR (edited May 25, 2001).]

 

If you don't want our help, what the hell are you still doing coming back to the boards? You need to grow up and show some respect to the people around here, they can help anyone with pretty much anything as long as you don't act like a 12 year old.

------------------
1992 Camaro RS
305ci automatic, all stock til I get some cash.
My 1992 RS

 

So let me get this straight....
When you refer to us a "white trash ****s", do you mean

a)We have white, trashy ****s?
b)We have white-trash ****s, but the rest of us is okay?
c) We have white, trash-****s? (if so, what does this mean?
d) We ARE white, trash-****s? (again, what does this mean?
e) We ARE white-trash ****s? I think I understand this one.

Please clarify. Thank you for your time.

Chris

 

Fellas, fellas, fellas. Blow him off, he isn't worth your time. He knows who the real trash is. By answering his rants you just give him a rise, and again he isn't worth it.

Pretty scary; three computers, huh? Do they come with different personalities? Or maybe you think we'll react differently to a person with a different screen name, that must be it.

You're a joke, fast.as.shmuck, go away.

Steve

 

I heard 300ish if that helps... A car show guy talked about his getting done and I think that is what he said.

 

....cant we all just get along.....

 

This is outta hand.

[This message has been edited by PhantomTPI (edited May 24, 2001).]

 

Sorry if i offended you 16 year olds,i am only 21 and feel like a 16 year old still but with a little more maturity then i had,half my friends are 16-21 and the other half are 21 and up,the younger guys keep me young and having fun,the older guys give me wisdom and insight as they have been around longer,i dont go around disrespecting adults anymore not like slow.as.fuc does,no offense to you guys is meant,i will rephrase it,he needs to stop acting like a 12 year old girl,lol.

------------------
www.rearman.com/camarokid.htm

If it aint a V-8 that $hit aint fast!,unless its a GN,lol!

305 tpi,700r-4 with shift kit,My mods are minimal,just a bunch of little $hit.Anyone know where to get underdrive pulleys for a v-belt set up?

[This message has been edited by IROC KID (edited May 24, 2001).]

 

I think you spelled your name wrong, is'nt it stupid.as.fuc, or ugly.as.fuc, or maybe immature.as.fuc.

 

Its amazing this post hasn't been locked yet..

------------------
1992 Camaro RS
305ci automatic, all stock til I get some cash.
My 1992 RS

 

LOL

------------------
www.rearman.com/camarokid.htm

If it aint a V-8 that $hit aint fast!,unless its a GN,lol!

305 tpi,700r-4 with shift kit,My mods are minimal,just a bunch of little $hit.Anyone know where to get underdrive pulleys for a v-belt set up?

 

yeah I'm almost 21, I act almost 12. But I don't get all p|ssed off in here, actually this is the only message board where I don't, 'cept when someone flames someone by calling them a "*****" that's bull sh|t... Anywayz I just wanted to post before this topic is locked

And I heard around $200-$300 to shave handles, so that aint bad if you got it to spare...

 

I thought this was an inteligent post. Fooled me. Now it's locked.

Fast.as.snot: If there is a problem, take it up with me or Dirk, otherwise let it be.

------------------
Bob '89 Ram Air Formula 350
And until that time when death won't wait, let each man rage against his fate. (O'neill)
My car's homepage
Rider's Ride