Need help.
Thread Starter
Junior Member
Joined: Oct 2011
Posts: 2
Likes: 0
From: minden ne
Car: 92 chevy truck
Engine: 350
Transmission: auto
Need help.
I'm a third gen lover there is no other way to put it ive recently found a 84 camaro and was wondering are all third gen bodys the same, meaning can i swap out the better looking front clip, side skirts, and rear bumper of a 92 onto the 84?
Joined: Oct 2006
Posts: 3,041
Likes: 8
From: West of Toronto
Car: 89 IROC
Engine: 305 TPI / ZZ4 cam
Transmission: Stage 2 700R4, LS1 driveshaft
Axle/Gears: Strange 3.42 w/ Auburn
Re: Need help.
Parts are interchangeable but you may need to swap the front fenders as well. Not sure the 84 fender lines will match up to the 92 nose. 85 and up are fully interchangeable.
Junior Member
Joined: Jul 2011
Posts: 18
Likes: 0
From: tarpon springs fl
Car: 91 camaro rs
Engine: 5.0l
Transmission: 700r4
Axle/Gears: 2.73
Re: Need help.
You can swap all the skirts but you may need to drill 2 holes in the lower part of the fenders and the rear quarters
Member
iTrader: (1)
Joined: Mar 2012
Posts: 127
Likes: 0
From: King of Prussia, PA
Car: 1983 Camaro
Engine: 358 SBC
Transmission: TH350
Axle/Gears: 9" Ford 4.56s
Re: Need help.
I swapped front bumpers on my 3rd gen. Had to drill the holes out a little larger to make it fit perfectly. Took a decent amount of time and effort to make sure both fenders had the same gap with my fiberglass hood. Started out at almost an inch gap on the passengers side. was able to get it closed up to virtually no gap. With a little tender love and some patience, front bumpers and fenders are able to be swapped
Thread
Thread Starter
Forum
Replies
Last Post
Elephantismo
Electronics
14
Feb 13, 2019 12:51 AM







