Shift Knobs
#1
Member
Thread Starter
iTrader: (2)
Join Date: Aug 2001
Location: Mentor, OH
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Shift *****
I'm sure some of you have changed your shifter *****....
I wanan get one from Mallory Billet that has Z28 engraved on it. They market them for the 4 gens and I asked their product sales guy if it would fit my '84 Z28. He said *probably* but I would need to find out what the measurement is on the shifter stem so they can sell it to me with the appropriate thread adapter....
Anyone know what the threading measure on a stock 5 speed shifter stem is in '84? Or have any of you bought a shift from Mallory Billet and already know what I need to do??
-Jason
------------------
'84 5.0 liter v8 Z28 Camaro
'93 3.3 liter v6 Grand Am SE
http://www.lightstream.net/~the_maniac
E-Mail: The_Maniac@lightstream.net
I wanan get one from Mallory Billet that has Z28 engraved on it. They market them for the 4 gens and I asked their product sales guy if it would fit my '84 Z28. He said *probably* but I would need to find out what the measurement is on the shifter stem so they can sell it to me with the appropriate thread adapter....
Anyone know what the threading measure on a stock 5 speed shifter stem is in '84? Or have any of you bought a shift from Mallory Billet and already know what I need to do??
-Jason
------------------
'84 5.0 liter v8 Z28 Camaro
'93 3.3 liter v6 Grand Am SE
http://www.lightstream.net/~the_maniac
E-Mail: The_Maniac@lightstream.net
#2
Supreme Member
Join Date: Dec 2000
Location: United States
Posts: 2,078
Likes: 0
Received 0 Likes
on
0 Posts
I have that billet with Z28 Emblem on it, i bought it from a member on this board, The Thread is smaller than factories, so what i did was put tape around the shifter and put the **** on it so it could hold for the mean time, Nice quality i like it
#3
Supreme Member
Join Date: Mar 2001
Location: Portland, OR www.cascadecrew.org
Posts: 6,577
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
I got mine from chevymall.com they sell them with the z28 emblem on them too. you might check there and see who has the better price, mine fit NO problem, and the chevymall one came with a couple of adapters, so it could fit any stock camaro shifter.
#4
Member
Thread Starter
iTrader: (2)
Join Date: Aug 2001
Location: Mentor, OH
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Thank you both, the information is helpful. I see that the one on ChevyMall.com is the same as the one from Billet (half the price). I appreciate the heads up on ChevyMall.com (save whenever possible, right).
Thanks again. I can order it in the winter and install it when I break the Z back out for Spring/Summer
------------------
'84 5.0 liter v8 Z28 Camaro
'93 3.3 liter v6 Grand Am SE
http://www.lightstream.net/~the_maniac
E-Mail: The_Maniac@lightstream.net
Thanks again. I can order it in the winter and install it when I break the Z back out for Spring/Summer
------------------
'84 5.0 liter v8 Z28 Camaro
'93 3.3 liter v6 Grand Am SE
http://www.lightstream.net/~the_maniac
E-Mail: The_Maniac@lightstream.net
#5
TGO Supporter
iTrader: (2)
I have a Mallory **** on my GTA. It was a perfect fit. Looks damned good too.
------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
Custom Thirdgen Subwoofer Enclosures
"I didn't know a bored out Ford could go so slow" -Shenandoah
------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
Custom Thirdgen Subwoofer Enclosures
"I didn't know a bored out Ford could go so slow" -Shenandoah
Thread
Thread Starter
Forum
Replies
Last Post
Night rider327
Interior Parts for Sale
2
02-25-2016 09:50 AM