Body General body information and techniques for restoration, repairs, and modifications.

GP on Corbeau Racing Seats

Thread Tools
 
Search this Thread
 
Old 08-31-2001, 05:53 PM
  #1  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
GP on Corbeau Racing Seats

Hey I really didnt know were to post this were everyone would most likely see it and give them a chance to get in on it but.... I have started a GP with a Corbeau dealer for some racing seats. With 13 orders we can get the Forza style racing seats for 190 each which are normally 220. You can view the seats here at this website:

http://www.corbeau.com/brochure/index.html

Now we are not limited to just one seat style so if you want a differnet one post and say so.. however we can not get a discount on all the seats we do have to limit it the GP to just a few different styles so hopefully we can decide on a few styles and still make everyone happy. So post and let me know if your interested or email me.

Thanks, Mike
Old 09-01-2001, 12:02 PM
  #2  
Member

 
86Sprtcpe's Avatar
 
Join Date: Feb 2001
Location: NY
Posts: 141
Likes: 0
Received 1 Like on 1 Post
Car: 1987 Camaro IROC-Z
Engine: L98
Transmission: 700r4
Axle/Gears: BW 9 Bolt 3:27
CARRERAS, CARRERAS, CARRERAS!
Old 09-01-2001, 05:56 PM
  #3  
Supreme Member
 
Roshambo's Avatar
 
Join Date: Apr 2000
Location: Oregon
Posts: 1,408
Likes: 0
Received 1 Like on 1 Post
<font face="Verdana, Arial" size="2">Originally posted by 86Sprtcpe:
CARRERAS, CARRERAS, CARRERAS!</font>
I agree, but, it looks like those are a bit more spendy, so does that mean we would need more people to lower the price?

Also, Mike, When is the cut off date for this GP?

-Roshambo

------------------
-Joe
1988 Pontiac Trans Am WS6 - 305 TPI, 700R4, 3.23 Posi, Digital Dash, Leather Seats, Maui Blue with Silver GFX, T-tops, Tinted Glass, Gutted MAF, TB Coolant Bypass, K&N Cone Filter, Hi Flo Cat, 3" exhaust from Y-pipe back, MSD Super Coil, Accel 8mm wires, L98 Aluminum Heads, Ported and Polished Plenum, Siamesed Intake, Aluminum Driveshaft, Edelbrock 3 point Strut Tower Brace.
Old 09-01-2001, 06:47 PM
  #4  
Supreme Member

 
soulbounder's Avatar
 
Join Date: Jul 2000
Location: Tomball, TX
Posts: 1,787
Likes: 0
Received 20 Likes on 16 Posts
Car: 89 TTA
Engine: Turbo 3.8
Transmission: 200R4
I second the carreras!!!!! Only in leather though.
Old 09-01-2001, 07:12 PM
  #5  
Senior Member
 
LeftTurn1LE's Avatar
 
Join Date: Jun 2001
Posts: 849
Likes: 0
Received 0 Likes on 0 Posts
I like the carrera seats also. I've been considering them for a long time. I have seen a lot of complaints about the quality of Corbeau seats though. I'd like to hear from people who have these seats or have had them before.
Old 09-02-2001, 10:32 AM
  #6  
TGO Supporter

iTrader: (2)
 
Jim85IROC's Avatar
 
Join Date: Jul 1999
Location: Readsboro, VT
Posts: 13,574
Received 9 Likes on 8 Posts
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
I was liking the Targa and the GTS seats too.

------------------

The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
Custom Thirdgen Subwoofer Enclosures
"I didn't know a bored out Ford could go so slow" -Shenandoah
Old 09-03-2001, 12:42 AM
  #7  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
Ok guys heres your answers... I'm not completely sure but I think we can get the Carrera seats for 314. I'm going to try and call them tomorrow and if I cant I will definately get ahold of them on Tues. As for people that have had these seats before there is only one person that has responded about these seats.. (see the Group Purchase thread at www.camaroz28.com and check out the post for this GP) ... however he was comenting on the Targa RS I believe. These Carreras that you want to get are brand new for this year I believe they have strong fabric on the wear areas to prevent what eventually happens with the seats like the Targa RS style seat. So hopefully these Carreras will be a better seat then the rest of the Corbeau line up. But again yes these seats are more expensive. I believe we have decide to go with the following style seats for this GP, the Forza (cheapier model for the budget guys, non reclinable) and the Carrera (more expensive model but fully adjustable) so let me know what you think so far this is how many people we got going...

7 for Camaroz28.com
1 for MNFbody.com
5 for Thirdgen.org
3 for myself, brother, and friends

so that gives us a total of 16 orders. Is there anyone else interested? If we can get to like 20 orders then we could be looking at some better pricing.
Old 09-03-2001, 12:43 AM
  #8  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
Ok guys heres your answers... I'm not completely sure but I think we can get the Carrera seats for 314. I'm going to try and call them tomorrow and if I cant I will definately get ahold of them on Tues. As for people that have had these seats before there is only one person that has responded about these seats.. (see the Group Purchase thread at www.camaroz28.com and check out the post for this GP) ... however he was comenting on the Targa RS I believe. These Carreras that you want to get are brand new for this year I believe they have strong fabric on the wear areas to prevent what eventually happens with the seats like the Targa RS style seat. So hopefully these Carreras will be a better seat then the rest of the Corbeau line up. But again yes these seats are more expensive. I believe we have decide to go with the following style seats for this GP, the Forza (cheapier model for the budget guys, non reclinable) and the Carrera (more expensive model but fully adjustable) so let me know what you think so far this is how many people we got going...

7 for Camaroz28.com
1 for MNFbody.com
5 for Thirdgen.org
3 for myself, brother, and friends

so that gives us a total of 16 orders. Is there anyone else interested? If we can get to like 20 orders then we could be looking at some better pricing.

-Mike
Old 09-03-2001, 09:10 AM
  #9  
Senior Member

 
Neil's Avatar
 
Join Date: Jul 1999
Location: Houston, TX
Posts: 888
Likes: 0
Received 0 Likes on 0 Posts
Car: '87+'02 Z28
Engine: 454 LSX
Transmission: T-56, Viper output shaft
Axle/Gears: Strage 12-bolt 3.73:1
I am interested in the Carrera seat as well, however, before I splurge on these I want to hear some opinions! Is there a deadline for this GP?
Thanks

------------------
1987 383 cu.in. IROC-Z: TPIS MiniRamIII / GM FastBurn heads/ 10.6:1 compression
Comp cams custom grind: Dur'n 224/236 Lift .536/.555
Strange 12Bolt Diff./ Neil's Home-Built BulletProof 700R4+Vigilante 2800 stall converter
MSD Billet Distributor, Dig 6+, & Blaster coil
Hooker Supercomp Long tube headers
Old 09-03-2001, 09:22 AM
  #10  
Supreme Member

 
soulbounder's Avatar
 
Join Date: Jul 2000
Location: Tomball, TX
Posts: 1,787
Likes: 0
Received 20 Likes on 16 Posts
Car: 89 TTA
Engine: Turbo 3.8
Transmission: 200R4
Well, I guess I can't get in on this. Mine have to be leather with a bit of custom coloring. Very expensive.
Old 09-03-2001, 01:22 PM
  #11  
Supreme Member

 
Superman's Avatar
 
Join Date: Jan 2000
Location: Panama City Beach,Florida
Posts: 1,301
Likes: 0
Received 1 Like on 1 Post
Car: 1989 Camaro
Engine: 406
Transmission: Pro-built 700R4
I am very intrested in the Carrera's if we can get them for $314 a peice. I was almost going to buy a set of Scat seats which are $699. I would like to get in on this if we can do it.
Old 09-03-2001, 11:52 PM
  #12  
Junior Member
 
BillyB4C's Avatar
 
Join Date: Jul 1999
Location: Leander TX
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
I'm interested in the Forza. How about the brackets? Could we get a discount on these also?

------------------
Billy
92 B4C 305TPI T5
Black W/ Purple ghost stripes
Texas Spokes Sports Car Club #63 ESP
14.32@98mph
Old 09-04-2001, 01:25 PM
  #13  
Supreme Member

 
Superman's Avatar
 
Join Date: Jan 2000
Location: Panama City Beach,Florida
Posts: 1,301
Likes: 0
Received 1 Like on 1 Post
Car: 1989 Camaro
Engine: 406
Transmission: Pro-built 700R4
I talked to a buddy of mine last night and he may want to get in on this to. He needs to know when its going to end and when he needs the money in by.
Old 09-04-2001, 01:36 PM
  #14  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
Well heres the thing about the deadline... there isnt one because I have not started it yet. I'm just organizing people together figuring out what everyone wants and what we can do. Now when everyone has agreed on everything and everyone knows what they want... I'll give you a phone number to call and all you'll have to do is call it and say your part of the Corbeau Forza, Carrera seat GP that Mike Ries has organized. They'll take down your name and your order.

So now what I would like everyone to do is send me and email at IROCU26@hotmail.com and I would like you to include your name, address, what year and kind of car you have, what style seat you want, what color, and how many you want.

When I have all of this information I will call in and find out what price he can give us and what shipping and all of the fine details.

As for leather the option is rather expensive I believe it is 399 or 499 per seat.

-Mike
Old 09-04-2001, 03:09 PM
  #15  
Supreme Member

 
soulbounder's Avatar
 
Join Date: Jul 2000
Location: Tomball, TX
Posts: 1,787
Likes: 0
Received 20 Likes on 16 Posts
Car: 89 TTA
Engine: Turbo 3.8
Transmission: 200R4
Would you happen to know the normal and GP prices for a custom leather carrera seat?
Old 09-05-2001, 10:00 AM
  #16  
Junior Member
 
korbin's Avatar
 
Join Date: May 2001
Location: indiana
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
i'm probably the only one who likes these but i would prefer the "A4" or the GTS II's in my car.... i was actually going to buy a couple of the A4... any help here?
Old 09-05-2001, 03:22 PM
  #17  
Supreme Member

 
Superman's Avatar
 
Join Date: Jan 2000
Location: Panama City Beach,Florida
Posts: 1,301
Likes: 0
Received 1 Like on 1 Post
Car: 1989 Camaro
Engine: 406
Transmission: Pro-built 700R4
Mike,

Did you ever get in touch with anybody and get hard prices on what the seats are gonna cost us?
Old 09-05-2001, 10:57 PM
  #18  
Junior Member
 
Hctv19's Avatar
 
Join Date: Apr 2001
Location: Noblesville, IN, USA
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
I'm in on the forzas, would like the carreras but they cost so dang much
especially with leather
Old 09-06-2001, 12:44 PM
  #19  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
Alright well I have 5 emails from the following people:

Mike Ritter
Neil Thapar
Billy Bryson

Random person who left no name (wanted for an 96 Eclipse)

Bobby Griffin

So there is five. If your name is not on the list above PLEASE email your information so I can get this GP going. Before I can guarantee any prices I need to know how many people are in on this GP. So please, please email me so I can get the final info and prices.

Thanks, Mike
Old 09-08-2001, 02:02 PM
  #20  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
a few more people have replied putting us at like 8 people so come on guys.

-Mike
Old 09-09-2001, 11:18 AM
  #21  
Member

 
86SCBNJ's Avatar
 
Join Date: Dec 2000
Location: new york
Posts: 245
Likes: 0
Received 0 Likes on 0 Posts
Iroc, u have mail, count me in on the GP...
Old 09-18-2001, 02:29 PM
  #22  
Member

 
86SCBNJ's Avatar
 
Join Date: Dec 2000
Location: new york
Posts: 245
Likes: 0
Received 0 Likes on 0 Posts
How are we doing, any word yet?? When can we start ordering seats??
Old 09-18-2001, 04:42 PM
  #23  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
Here we go guys!! He finally emailed me back with some prices. Heres an exact copy of the email he sent me and damn these are good prices compared to the normal ones. By the way if this is the first time you have seen this these seats can be viewed at this site:

http://www.corbeau.com/brochure/index.html
Heres the email:

Mike,
OK, here is the Deal. I have priced these BETTER than the last time we did the GP. Just remember that in order to get these prices the following 2 things need to be met/used.

#1. There MUST be at LEAST 10 poeple that place seat orders. Until we get 10 people, the orders will be held, after that, their orders will be processed immediatley.
#2. They MUST use the correct Group Purchase number (GP-8557-01)

Here are the prices for the G/Purchase:
Forza $184.99/ea
Targa RS $269.99
Carrara $309.99

Options:
Leather $349.99 (adds to the seat price)
Wide Version : Add 15%
Inflatable Lumbar $39.99
Seat Belt (Harness Pads) $13.50/per seat

Brackets with Sliders (except adapters)
"A" Adapter flats (re-use factory sliders where available) $24.99/per seat
"C" Custom brackets $52.99/per seat
"D" Custom brackets $63.99/per seat
"E" Custom brackets $69.99/per seat
"F" Ladder Bracket (mounts 2 seats) $139.99

With these great prices, I would like to have the bulk of the orders starting now & within the next 2 weeks if at all possible. Lets go ahead and start NOW. Please have the 4 people advise us when they order, that they are part of the group of 4 who wants them shipped together.
Also, please make sure everyone is aware that there may be some delays on seat brackets. Some brackets are actually made, as they are ordered. So there may be a week or so delay on them.
Have them start calling us direct to place their orders NOW!! Again, I cannot reiterate enough, that the prices I have given you, are the lowest we have ever done. These are even better than the "Mustang" GP we did a while back!!!

there ya go guys he even got better prices then I thought we would have!

-Mike

The phone number to call is:
1-800-44-STANG / 1-800-447-8264
Dont forget to tell them the GP number mentioned above, GP-8557-01 so you get the discounted prices.

Old 09-18-2001, 04:47 PM
  #24  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
Also a note make sure you know what bracket you need, if you have a 3rd gen camaro/firebird it is the "C" bracket part number C22024 (same for both sides) if you have a 4th gen it is the "D" bracket part number D1068T (again same for both sides)

If you have any other kind of vehicle you can look up the part number here:

http://www.corbeau.com/bracket.html

-Mike

Old 09-18-2001, 09:25 PM
  #25  
Junior Member
 
BillyB4C's Avatar
 
Join Date: Jul 1999
Location: Leander TX
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Mike,

Thanks for doing the leg work on this. I'm going to call tomorrow and order mine.

------------------
Billy
92 B4C 305TPI T5
Black W/ Purple ghost stripes
Texas Spokes Sports Car Club #63 ESP
14.32@98mph
Old 09-18-2001, 10:46 PM
  #26  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
Not a problem... I dont mind getting everyone a deal. This was orignally just going to be for my Minnesota F-Body Club..(www.mnfbody.com) but I thought why not let everyone have the chance to get in on it. This site has helped me out in the past numerous times.. time to give a little back

-Mike
Old 09-23-2001, 06:37 PM
  #27  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
TTT just so everyone has had a chance to see the update.
Old 09-24-2001, 12:00 PM
  #28  
Banned
 
aziroc's Avatar
 
Join Date: Oct 1999
Location: avondale, az
Posts: 1,147
Likes: 0
Received 0 Likes on 0 Posts
Car: 86 IROC-Z
Engine: 406
Transmission: 700R4
count me in. ill be getting 2 carrera seats, lumbar support, and *what clips do i need if i have electric seats???
Old 09-24-2001, 01:27 PM
  #29  
Supreme Member

 
Superman's Avatar
 
Join Date: Jan 2000
Location: Panama City Beach,Florida
Posts: 1,301
Likes: 0
Received 1 Like on 1 Post
Car: 1989 Camaro
Engine: 406
Transmission: Pro-built 700R4
aziroc,

I'm not sure about the clips,but if you give them a call at the above number I'm sure they can help ya. By the way they are closed on Mondays.
Old 09-25-2001, 09:17 AM
  #30  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
Hey guys my brother finally got his money to me and I placed my order and his this morning. Tony informed me that the order count is up to 8 with my orders. So get your orders in and we can get this thing on the move!

Take Care, Mike
Old 09-26-2001, 07:32 PM
  #31  
Junior Member
 
chrisandkristin's Avatar
 
Join Date: Apr 2001
Location: henderson NV USA
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
one question do i just call the number and enter the gp numbers and that is it
Old 09-27-2001, 09:19 PM
  #32  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
Call the number and tell the person that answers that you want to place an order for which ever corbeau seats you want and then mention you are part of a GP, then he will probably ask you for a GP number either that or just tell him the number above. Then he'll ask you about ordering info and thats it seats are on the way .

-Mike
Old 10-04-2001, 09:59 PM
  #33  
Junior Member
 
69 Mustang's Avatar
 
Join Date: Jul 1999
Location: South Jersey
Posts: 63
Likes: 0
Received 0 Likes on 0 Posts
Car: 87 Iroc Z-28
Engine: 355 Vortec Superram
Transmission: 700-R4
Is there a deadline? I'd like to ante up for the Targa RS's but I have to wait till the green comes in in a few weeks.

------------------
NATE DOGG
"LIGHTWEIGHT" of the Infamous Northeast Crew.
Old 10-06-2001, 02:55 PM
  #34  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
As far as I know there is no deadline set for this GP, however I wouldnt wait around. Call and find out if they have set a deadline just to make sure.

-Mike
Old 10-09-2001, 02:15 PM
  #35  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
Heres a reply from Tony about the shipping:

Mike,
Yes we have! If you do not mind, e-mail everyone that is involved & let them know that the orders will start shipping this week! Please also inform them to NOT to call Corbeau directly, as they are only the manufaturer & do not sell directly to the public. If they need status, please call us. Please also make sure they are made aware of the orders will be shipping this week, so they should start receiving their orders, LATE this week thru the following week!

Sincerely,

Tony - President
Mean Mustang Supply Inc
201 D Street
South Charleston WV 25303

ORDERS ONLY 1-800-44-STANG
TECH/QUESTIONS (304) 746-0300
FAX (304) 746-0395
WEBSITE:
http://members.aol.com/meanstang

So there you have it. There on there way.

-Mike
Old 10-10-2001, 02:34 PM
  #36  
Banned
 
aziroc's Avatar
 
Join Date: Oct 1999
Location: avondale, az
Posts: 1,147
Likes: 0
Received 0 Likes on 0 Posts
Car: 86 IROC-Z
Engine: 406
Transmission: 700R4
well i finally got mine... 2 red carrera's.. but how can i hook the seats up if i have electric seats??
Old 10-20-2001, 10:58 AM
  #37  
Banned
 
aziroc's Avatar
 
Join Date: Oct 1999
Location: avondale, az
Posts: 1,147
Likes: 0
Received 0 Likes on 0 Posts
Car: 86 IROC-Z
Engine: 406
Transmission: 700R4
can carreras fit on the electric seats rails??
Old 10-27-2001, 07:25 AM
  #38  
Banned
 
aziroc's Avatar
 
Join Date: Oct 1999
Location: avondale, az
Posts: 1,147
Likes: 0
Received 0 Likes on 0 Posts
Car: 86 IROC-Z
Engine: 406
Transmission: 700R4
just upping it just incase anyone hasnt seen this. BTW anyone get there seats yet? i orded mine a good 2 weeks ago and havent gotten them yet.
Old 10-27-2001, 09:28 AM
  #39  
Supreme Member

 
Superman's Avatar
 
Join Date: Jan 2000
Location: Panama City Beach,Florida
Posts: 1,301
Likes: 0
Received 1 Like on 1 Post
Car: 1989 Camaro
Engine: 406
Transmission: Pro-built 700R4
I just got mine Thursday. They said that they only had 5 sets of brakets for Camaro/Firebird and I was 6th on the list. They had to have some more made,so you should get yours this week.
Old 10-27-2001, 09:48 AM
  #40  
Senior Member
 
JucinGTA's Avatar
 
Join Date: May 2001
Posts: 638
Likes: 0
Received 0 Likes on 0 Posts
Just a prewarning if you havent ordered it yet. Im 6'4" and had these with the adapters

I could not fit. My head would hit the headliner unless I was pimped back The adapter brackets jack it up another few inches. I guess thats why they call it a headliner

[This message has been edited by JucinGTA (edited October 27, 2001).]
Old 11-03-2001, 04:49 AM
  #41  
Banned
 
aziroc's Avatar
 
Join Date: Oct 1999
Location: avondale, az
Posts: 1,147
Likes: 0
Received 0 Likes on 0 Posts
Car: 86 IROC-Z
Engine: 406
Transmission: 700R4
anyone get their's yet??

TTT
Old 11-03-2001, 01:51 PM
  #42  
Junior Member
 
thabrotherhood's Avatar
 
Join Date: Apr 2001
Location: Vancouver, BC, Canada
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Hi! I guess I have been out of it for a while, but i really NEED new seats, and I have always REALLY wanted the Corbeau Carrera and Targa RS. Is there anyway you guys could get me in on a deal? I'd really really appreciate it! Please let me know!

------------------
89 Camaro RS
305 TBI
K&N Filtercharger
3" Catback Exhaust
Flowmaster Muffler w/ 3" Chrome Tips
17" eagle alloys
Yokohama Avid H4 255/40
Stage 2 shift kit
GT formula steering wheel
MSD 8.5 mm Heli-core ignition wiring
2 Audiobahn 12" subs
more coming soon...
Old 11-03-2001, 06:29 PM
  #43  
Junior Member
 
BillyB4C's Avatar
 
Join Date: Jul 1999
Location: Leander TX
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
still waiting on mine.
Old 11-05-2001, 03:35 PM
  #44  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
Hey guys theres been some problems with getting the seats apparently. I got mine a long time ago and assumed everyone had got theres or would be getting them shortly. However a lot of guys over at camaroz28.com havent got theres yet either so I'm calling in and finding out what the hell is going on. Please email me if you havent got yours yet either.

Thanks, Mike
Old 11-06-2001, 06:05 AM
  #45  
Member
 
Gib_Sandwich's Avatar
 
Join Date: Jul 2001
Location: NSW Australia
Posts: 314
Likes: 0
Received 0 Likes on 0 Posts
Wow those Carrera's look awesome
If I bought them, what would be the situation with the seatbelts?
I would like to avoid the seatbelts out of the headliner
How do you attach the seatbelts to the harness style seats?

------------------
Nobody ever got cancer from smoking tires!
gibsandwich@hotmail.com
Get ICQ Page My ICQ
ICQ # 18562788
------------------

1982 Z28 Camaro
305ci LG4, Muncie 4-Speed, Holley Carburettor (CFM Unknown), 2.5" Stainless steel exhaust all the way through.
Fibreglass hood.
Boston 4x6" CX7e 2-ways, 6x9" Nippon America (no-name?) 3-ways
Other stuff I haven't figured out yet.
Old 11-07-2001, 12:01 PM
  #46  
Banned
 
aziroc's Avatar
 
Join Date: Oct 1999
Location: avondale, az
Posts: 1,147
Likes: 0
Received 0 Likes on 0 Posts
Car: 86 IROC-Z
Engine: 406
Transmission: 700R4
any new updates on when the seats will be in?
Old 11-08-2001, 12:16 PM
  #47  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
Ok guys sorry it took me so long. I ran into a bit of a problem.. broke my right foot playing hockey. Anyway I got ahold of Tony and he apoligizes for the wait and your patience but heres the deal it has nothing to do with them it has everything to do with Corbeau. It seems that the reason why most of you didnt get your seats is because more then likely you ordered the brackets as well. As it turned out (and I dont know why they didnt tell you this over the phone) Corbeau was short in stock with the brackets for our cars. So rather then just shipping the seats they have waited unitl they got the brackets in to more or less save on shipping charges since they charged you for what it would have been orignally. If they would have shipped it seperately it would have cost more in shipping. Since Corbeau does the shipping they didnt ship them seperately. However Mean Mustang was told by Corbeau that the brackets did come in and that all of our seats have been shipped out. So atleast you now know what the hold up was. Figure if they did send us the seats without the brackets what would you have done with them anyway? Let them lay around the house till you got the brackets? So I myself apoligize (dont know why) but thanks for holding out and not calling Tony repeatedly. As they had nothing to do with the problems for they where shipped directly from Corbeau. I believe Tony held out his end of the bargin by getting us the best damn price for these seats on the net.
-Mike

P.S.> If you have any remaining questions please feel free to email me directly @ irocu26@hotmail.com
Old 11-24-2001, 07:31 PM
  #48  
Junior Member
 
69 Mustang's Avatar
 
Join Date: Jul 1999
Location: South Jersey
Posts: 63
Likes: 0
Received 0 Likes on 0 Posts
Car: 87 Iroc Z-28
Engine: 355 Vortec Superram
Transmission: 700-R4
I ordered the Targa RS's a while back. Glad to know they were held in shipping and not caght in the anthrax thing out here in Jersey. Any time frame I should be expecting them?
Old 12-19-2001, 01:13 PM
  #49  
Junior Member

Thread Starter
iTrader: (1)
 
IROCU69's Avatar
 
Join Date: Feb 2000
Location: Coon Rapids, Minnesota, USA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
Hey guys not sure if you are aware of whats going on but you should check out the www.camaroz28.com message board under the group purchase forum, posting "GP on corbeau racing seats". Things are not going well on mean mustangs side of this GP a lot of people have gotten quite angry and have been trying to figure out whats going on just as I have. No one can get ahold of mean mustang and people have called the FBI and the better buisness bureau in hopes to find an answer. If you havent already gotten your seats and have been waiting for a while I suggest you file something with your credit card company so you can get your money back. This deal has gone sour. I greatly apoligize for this going bad, although I dont have anything to do with mean mustang. I hope everyone makes out ok.

-Mike
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HP52TA
Interior
8
02-03-2018 10:51 PM
ctoledo0834
Interior
5
09-18-2015 04:16 PM
scottmoyer
Camaros for Sale
3
09-07-2015 07:06 PM
84 TA NV
Firebirds for Sale
1
09-06-2015 08:02 PM
SG91camaro
Camaros for Sale
2
09-05-2015 10:27 PM



Quick Reply: GP on Corbeau Racing Seats



All times are GMT -5. The time now is 09:08 PM.