Body General body information and techniques for restoration, repairs, and modifications.

BUMPER SWAP 91->82-84

Thread Tools
 
Search this Thread
 
Old Yesterday | 11:06 PM
  #1  
RedMenaceU99's Avatar
Thread Starter
Junior Member
 
Joined: May 2026
Posts: 3
Likes: 0
BUMPER SWAP 91->82-84

Hello everyone, new owner of a 1991 Firebird (base) here. The bumper and front fender ground effects are damaged and so needing replaced. My question is, what, specifically, is required to swap the bumper to the 82-84 vent style? I've heard you need to swap to the older headlight assemblies, i've heard it was optional. I know i'll need the old turn signal housings. Also seen on here you need to change like the bumper absorber i think to the old style? I'm just looking for what parts i'll actually need to buy. I found the 82-84 polyurethane bumper for 200. So what other parts will i need to purchase and what other work will need to be done for it to bolt up and fit to the car?

I have another question also, in the picture below, what exactly are these trim/ground effects pieces under the bumper in the below picture? Or where to find them? i want them to go with the rest of the car but i cant find them anywhere nor know what they are called. Are they stupid hard to find and expensive? Just these little spoiler things in front of the wheels on the front fender and the small trim piece running along the bottom of the bumper.


Any advice on either of these would be greatly appreciated. I've looked at some previous posts on here but im just seeing if theres any more detailed or specific info i could get by making a post myself.

Reply
Old Today | 06:34 PM
  #2  
1989karr's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2005
Posts: 2,511
Likes: 202
From: Hawaii
Car: 89' Firebird / 87' Formula
Engine: 3.4 / 5.0
Transmission: 700-R4
Axle/Gears: 3.42 / 3.42
Re: BUMPER SWAP 91->82-84

bumper cover
impact bar
bumper pad / cushion ...i forget the name honestly
turn signals
the metal brace that the signals rest on
headlight buckes
headlight bezels

There may be a couple more parts but Id say thats the most of it.
Reply
Old Today | 06:42 PM
  #3  
RedMenaceU99's Avatar
Thread Starter
Junior Member
 
Joined: May 2026
Posts: 3
Likes: 0
Re: BUMPER SWAP 91->82-84

Originally Posted by 1989karr
bumper cover
impact bar
bumper pad / cushion ...i forget the name honestly
turn signals
the metal brace that the signals rest on
headlight buckes
headlight bezels

There may be a couple more parts but Id say thats the most of it.
Ok thank you. Any idea what that would cost ? The price to beat is like 900 before paint thats for the 91 effects and bumper.
Reply
Old Today | 08:27 PM
  #4  
Firechicken82's Avatar
Supreme Member
Liked
 
Joined: Aug 2021
Posts: 1,229
Likes: 348
From: CT
Car: 82 TA
Engine: Zz430 clone w a torquestorm blower
Transmission: Magnum f
Axle/Gears: Ford 9 w 4.11
Re: BUMPER SWAP 91->82-84

The lower ground effects are difficult to find. They're unique to trans ams from 82, some 83s and a small amount of 84s. There are numerous KITT replica companies that have these unique ground effect for the front and back. You don't need them for the front end to go together though.
Reply
Old Today | 08:31 PM
  #5  
RedMenaceU99's Avatar
Thread Starter
Junior Member
 
Joined: May 2026
Posts: 3
Likes: 0
Re: BUMPER SWAP 91->82-84

Originally Posted by Firechicken82
The lower ground effects are difficult to find. They're unique to trans ams from 82, some 83s and a small amount of 84s. There are numerous KITT replica companies that have these unique ground effect for the front and back. You don't need them for the front end to go together though.
okay thank you.i just wanted the ground effects to flow better into the 91 ground effects on the rest of the car. I found this on ebay, would this be ther "complete" set for the front of the car or is there another piece that goes on the bumper?

Reply
Old Today | 08:34 PM
  #6  
Firechicken82's Avatar
Supreme Member
Liked
 
Joined: Aug 2021
Posts: 1,229
Likes: 348
From: CT
Car: 82 TA
Engine: Zz430 clone w a torquestorm blower
Transmission: Magnum f
Axle/Gears: Ford 9 w 4.11
Re: BUMPER SWAP 91->82-84

Wow, jump on those!
Reply
Old Today | 09:17 PM
  #7  
Firechicken82's Avatar
Supreme Member
Liked
 
Joined: Aug 2021
Posts: 1,229
Likes: 348
From: CT
Car: 82 TA
Engine: Zz430 clone w a torquestorm blower
Transmission: Magnum f
Axle/Gears: Ford 9 w 4.11
Re: BUMPER SWAP 91->82-84

Wow, jump on those!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Edan
Body
5
Dec 10, 2020 06:36 PM
ghost91
Auto Detailing and Appearance
7
Apr 18, 2012 06:17 PM
three33three
Body
1
Sep 6, 2003 12:53 PM
sheltonw3
Body
4
Sep 16, 2002 09:50 AM




All times are GMT -5. The time now is 11:08 PM.