well I have my 3 piece spoiler and it's ready to be put on, I just need to know exactly how far apart and where to drill the holes, what size should the holes be etc.


thanks

 

Try going to the junkyard and getting the measurments

 

You could also make a template using some construction paper or posterboard. The factory holes are a small bit oversized to allow for minor fit adjustment.

 

Its easy, just make the templates and line them up correctly and you'll have no problems from it.I put a 3 piece on to my 85 SC, that makes a big difference once its on there. For some reason a camaro with out any kind of spoiler looks kinda wiered to me.

 

hell yea a camaro without a spoiler looks wierd, to me it doesn't even look sporty, just bland.


ok a template, good idea guys I just have to get the construction paper/carboard and I'm all set .

now one last thing, how the hell do I hook up the third brake light!?

 

just extend the wires down to your exsiting brake lights and tap into one of those.you can use a wire nut or some thing like that.

 

If you have a 3rd brake light in the spoiler (which I assume you don't have one one currently for some reason) , the factory way had a contact on the trim piece that covered the hatch latch (#2) and a spring loaded contact on the hatch deck (#1) that when shut (the hatch shut I mean) , made contact to light the 3rd brake light.