hi all coming home from work when i braked from 70 to 30 the sterring wheel started to shake ,under light brakeing seems fine it did not pull to any side while brakeing i put new pads in and checked them pass side ok drive side pads have a little movement could this be calliper issue or the brake hose ,callipers are quite dear over here so hope its the hose

 

rotors could be warped

 

not the rotors ive put new set on ,wheres the best place to get brakelines and callipers from the states

 

Do some troubleshooting before you throw parts at the problem. Steering wheel shimmy is gonna come from warped rotors or worn steering parts, loose/bad wheel bearings. Check everything out to pinpoint your problem, you might save yourself some cash.
I just picked up Delco brake parts for decent prices from the link below.

http://www.rockauto.com/

Corky

 

I agree, it's not unheard of to get warped rotors new in the box.

Adam

 

well ill get them checked out but why would the driver side pads move in the caliper my wife pressed brake pedal and caliper did not push the pads on to the disc thanks for top link corky