sub box pics
sub box pics
I just wanted to post some pics of my sub box that is now for sale (more info in the classified section). I recently sold my Formula, so all of the F-body specific stuff is being sold off. I'm also selling my DJ Sexay kicks.

Here's my kicks; I never had the hole cut for the tweeters, but it's easily done with a dremel.

Here's my kicks; I never had the hole cut for the tweeters, but it's easily done with a dremel.
Here's the ad if you didn't see it in the classifieds:
I am selling my sub box with two Infinity Kappa 10" DVC subs installed. The box was custom made for me out of 3/4" medium-density fiberboard. There are two seperate chambers each of about .5 cu. ft. of air space. This volume gives the Kappas their flattest frequency curve (as specified in the included instructions). Each chamber is stuffed with 1/2 lb. of fiberfill, and both subs are wired 2-ohm(but can be wired a variety of ways. The box sits snuggly in the hatch area on the protruding edge about half-way down the well. This allows amp mounting underneath the box, and has plenty of surrounding air-space to breath (I had an Alpine MRV-T503 running 2-ohm stereo for a year and a half with zero problems). The driver's side hatch compartment is still fully usable. This setup yeilds very accurate musical bass. It will play loud enough to let your neighborhood know your coming, but it won't break any SPL records if that's what you're after. If your looking for a boomy "ported box" sound, this isn't for you. But if you want tight, accurate, low, musical bass, this setup is excellent.
Asking $200 plus shipping. Please email me at BZiggyZ@aol.com
Thanks for looking!
I am selling my sub box with two Infinity Kappa 10" DVC subs installed. The box was custom made for me out of 3/4" medium-density fiberboard. There are two seperate chambers each of about .5 cu. ft. of air space. This volume gives the Kappas their flattest frequency curve (as specified in the included instructions). Each chamber is stuffed with 1/2 lb. of fiberfill, and both subs are wired 2-ohm(but can be wired a variety of ways. The box sits snuggly in the hatch area on the protruding edge about half-way down the well. This allows amp mounting underneath the box, and has plenty of surrounding air-space to breath (I had an Alpine MRV-T503 running 2-ohm stereo for a year and a half with zero problems). The driver's side hatch compartment is still fully usable. This setup yeilds very accurate musical bass. It will play loud enough to let your neighborhood know your coming, but it won't break any SPL records if that's what you're after. If your looking for a boomy "ported box" sound, this isn't for you. But if you want tight, accurate, low, musical bass, this setup is excellent.
Asking $200 plus shipping. Please email me at BZiggyZ@aol.com
Thanks for looking!
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM




