Are q-logic kickpanels really that much worse than fiberglass ones?
Thread Starter
Supreme Member
Joined: Mar 2001
Posts: 1,065
Likes: 0
From: Tucson, Az, USA
Car: 1992 RS
Engine: 3.1L V6
Transmission: T5
Are q-logic kickpanels really that much worse than fiberglass ones?
My friend is offering me his off his 91 RS for 40 bucks but they're qlogic. I figured that would be a great price. But do you guys think I should just buy the fiberglass ones off here? Also, does anyone have qlogic kickpanels and a 5 speed. Does the kickpanel reach to the clutch? Does it interfere at all? How is the imaging for these? Please give an unbiased opinion if you already have qlogics or djsexays. Thanks a bunch!
Supreme Member
Joined: Aug 1999
Posts: 3,534
Likes: 0
From: Mililani, HI USofA Search Posts: 2848.............. Whore Posts: 47.................. Magical Whore Posts: 1
Car: 91 Camaro 77K
Engine: 3.1 Vslick
They Suck
Dont fit as good
Dont look as good
Dont sound as good.
Dont fit as good
Dont look as good
Dont sound as good.
Supreme Member
Joined: Aug 1999
Posts: 1,437
Likes: 0
From: Lowell, MA
Car: 89 Camaro RS
Engine: sbc 400
Transmission: th350
qlogics are made of plastic. less rigid than fiberglass. not enclosed (but neither are all fiberglass ones. i wasnt very impressed with them and they are overpriced for what they are. i'd highly recommend getting yourself a set off of one of the guys from here. more custom that way and less expensive.
Supreme Member
Joined: Aug 1999
Posts: 3,534
Likes: 0
From: Mililani, HI USofA Search Posts: 2848.............. Whore Posts: 47.................. Magical Whore Posts: 1
Car: 91 Camaro 77K
Engine: 3.1 Vslick
Originally posted by CrazyHawaiian
for $40 you cant loose. even if you dont end up liking them you can sell them for more than $40. they are $150 new.
for $40 you cant loose. even if you dont end up liking them you can sell them for more than $40. they are $150 new.
Trending Topics
For 40 bucks I'd do it. I bought a pair quite a while ago to get me by while I was building my custom ones. Actually I still have them for now because I've been to busy to get to building new ones. On a scale from 1-10 I'd give them a 6. But you won't get any better for 40 bucks.
Supreme Member
iTrader: (2)
Joined: Jan 2001
Posts: 4,149
Likes: 3
From: Tampa, FL, USA
Car: 93 240SX
Engine: LQ9
Transmission: T56
Axle/Gears: 3.54 R200 IRS
I've seen the Q Logic in a stick car, they're horrible, my DJ Sexay's arent bad at all, specially compared to the Q's
Senior Member
Joined: Jun 2001
Posts: 818
Likes: 0
From: Enumclaw, WA USA
Car: '96 M3
Engine: 3.2L V-6
Transmission: 5-sp
Right here.
DJ sold me the molds when he started focusing more on 4th gens. I've been making them ever since. Check out www.subenclosures.com for more info.
DJ sold me the molds when he started focusing more on 4th gens. I've been making them ever since. Check out www.subenclosures.com for more info. Re: Are q-logic kickpanels really that much worse than fiberglass ones?
Right here.
DJ sold me the molds when he started focusing more on 4th gens. I've been making them ever since. Check out www.subenclosures.com for more info.
DJ sold me the molds when he started focusing more on 4th gens. I've been making them ever since. Check out www.subenclosures.com for more info.That site is down. Are you still making these?
Joined: Oct 2006
Posts: 3,041
Likes: 8
From: West of Toronto
Car: 89 IROC
Engine: 305 TPI / ZZ4 cam
Transmission: Stage 2 700R4, LS1 driveshaft
Axle/Gears: Strange 3.42 w/ Auburn
Re: Are q-logic kickpanels really that much worse than fiberglass ones?
Even though the post is 8 years old, I ran Q-logic's when I competed in IASCA many moons ago.. Imaging was good enough to earn me a few 1st place trophies. 
You could always pick up another set of kick panels and fab them up. There are a few pics here on TGO with guys who have done it.

You could always pick up another set of kick panels and fab them up. There are a few pics here on TGO with guys who have done it.
Thread
Thread Starter
Forum
Replies
Last Post
91TTOPZ
Exterior Parts for Sale
5
Sep 20, 2016 12:42 PM







