which harness, to wire into stock
Thread Starter
Senior Member
iTrader: (4)
Joined: Aug 1999
Posts: 629
Likes: 0
From: previously OKINAWA JAPAN,georgia, now new england
Car: 1989 IROC--1989 T/A
Engine: 5.7 TPI in both
Transmission: W/C T-5 in both
Axle/Gears: B/W 3.27 in both
which harness, to wire into stock
hello all, i need a wire harness to install an aftermarket radio in to my 1989 T/A. The harnesses online say eithe a 12 pin, or 21 pin. The harness in the car has a 14 pin. If this is any help, the plug is the same as my 1989 IROC back in the states. Problem is i can't get one here, and my friends suck at mailing me stuff. Please dig me up a part number. thanks much in advance
shawn
I did find this Metra 70-1858. butttttttttttt.
shawn
I did find this Metra 70-1858. butttttttttttt.
Member
Joined: Jul 2002
Posts: 433
Likes: 0
From: Arlington, TX
Car: '88 GTA
Engine: TPI 350
Transmission: auto
what does the harness look like?
does it look like this sorta?
or like this?
the first is for the 21 pin, the second is the 12 pin. if its not one of those then look on the metra site for it.
does it look like this sorta?
or like this?
the first is for the 21 pin, the second is the 12 pin. if its not one of those then look on the metra site for it.
Thread Starter
Senior Member
iTrader: (4)
Joined: Aug 1999
Posts: 629
Likes: 0
From: previously OKINAWA JAPAN,georgia, now new england
Car: 1989 IROC--1989 T/A
Engine: 5.7 TPI in both
Transmission: W/C T-5 in both
Axle/Gears: B/W 3.27 in both
ok it is the 21 pin for sure.
now to get one.
thanks much
now to get one.
thanks much
Thread
Thread Starter
Forum
Replies
Last Post