dbl din , a little differant
#1
Member
Thread Starter
Join Date: Sep 2008
Location: ,Ontario Canada
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Z28,03 GSXR1000,07 RMZ 250
Engine: H.O. L69
Transmission: 5spd
Axle/Gears: 3.73 possie
dbl din , a little differant
like a lot of us 3rd gen owners we want to upgrade our systems to what a new civic comes with these days. so I want to install a double din android unit .. just installed one in a buddies tundra last night im very impressed with and started me wanting one in the camaro..so what i want to do or know has anyone tried moving the heater unit down to the stereo placement and using that space for the double din unit.basic switch places...the reason is i would really like the unit up higher for viewing ease. i know theres a metal bracket in there that i would have to cut and fab a bracket and a face plate which i can do.. unfortunately i don't have access to the car until april as its in storage so i cant look.. so has anyone tried that? i have searched and i do like the guy that moved it to the ashtray position but i would prefer not cutting the console..
#2
Member
Thread Starter
Join Date: Sep 2008
Location: ,Ontario Canada
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Z28,03 GSXR1000,07 RMZ 250
Engine: H.O. L69
Transmission: 5spd
Axle/Gears: 3.73 possie
Re: dbl din , a little differant
no one has any input here?
#4
Member
Re: dbl din , a little differant
Ya I installed mine last year and thought about dropping mine also. however the heating controll cables got in the way of the deck install so instead i raised mine up about a 1/2" to make room for the double din. Modifying the bracket was still required.
#5
Member
Re: dbl din , a little differant
I also had to make my own plate to cover. Modifying the original didn't leave any space between the heating controlls and the deck.
#6
Member
Re: dbl din , a little differant
For some reason the double din plate on the link looks like its covered in a vinyl. I also turned my ashtray into an Ipod docking station.
#7
Member
Thread Starter
Join Date: Sep 2008
Location: ,Ontario Canada
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Z28,03 GSXR1000,07 RMZ 250
Engine: H.O. L69
Transmission: 5spd
Axle/Gears: 3.73 possie
Re: dbl din , a little differant
Trending Topics
#8
Member
Re: dbl din , a little differant
oh I understood. The cables for the heater controls was getting in the way which made it difficult to get the deck in above it. They were too tight at least in mine anyway. I tried but couldn't make it work.
#9
Member
Re: dbl din , a little differant
Maybe you could get longer cables? I'd be even curious as to how he got the controls in the ashtray location myself.
#10
Member
Re: dbl din , a little differant
Wow! just searched it and took a look. I guess he swapped out some cables and got up in the dash to get slack on others. It can be done! I wasn't gonna go through all that but good luck with that project if you decide to go ahead with it.
#11
Junior Member
iTrader: (1)
Join Date: Jul 2008
Location: Fairborn, OH
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro Sport Coupe
Engine: 2.8l v6 soon to be 350
Transmission: auto
Re: dbl din , a little differant
Pretty sure you could just flip that bezel upside down? Maybe not. Been a while since I have been in my 'maro. Is it a square or a trapezoid?
#12
Member
Thread Starter
Join Date: Sep 2008
Location: ,Ontario Canada
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Z28,03 GSXR1000,07 RMZ 250
Engine: H.O. L69
Transmission: 5spd
Axle/Gears: 3.73 possie
Re: dbl din , a little differant
I really want to try and do it .. it would just look better and the function would be more user friendly with the deck up higher as you really don't use the heater controls only a couple times a day if that..
#13
Re: dbl din , a little differant
I personally think having the heater controls under the radio just wouldn't look right.
I think what Racer did is the best DD conversion I've seen yet
https://www.thirdgen.org/forums/car-...ouble-din.html
I'm going to attempt this most likely this summer
I think what Racer did is the best DD conversion I've seen yet
https://www.thirdgen.org/forums/car-...ouble-din.html
I'm going to attempt this most likely this summer
#14
Member
Re: dbl din , a little differant
The bezel is slightly tapered at the top so turning it upside down is a no go. You would have to fab a new plate.
#15
Senior Member
iTrader: (1)
Join Date: Mar 2012
Location: Georgia
Posts: 574
Likes: 0
Received 6 Likes
on
4 Posts
Car: 91' Z28. 70' Dune Buggy
Engine: LSX Cam/Full Bolt ons
Transmission: T56
Axle/Gears: 4.10
Re: dbl din , a little differant
I moved my HVAC to the passenger side. It works for now, but I plan on either lengthing the hoses/wires in order to place it inside the center console compartment.
Or install some fancy flip down assembly so that the HVAC is in its current passenger side location, with the ability to flip up so that it tucks up out of view, then flips down when I want to adjust it again
So theres 3 other possible ideas.
Or install some fancy flip down assembly so that the HVAC is in its current passenger side location, with the ability to flip up so that it tucks up out of view, then flips down when I want to adjust it again
So theres 3 other possible ideas.
#16
Re: dbl din , a little differant
sleeper Z where did you get that phone holder right below the radio? that thing is sick.
#17
Member
Re: dbl din , a little differant
I got a beat up console cover from a wrecker and molded the ashtray portion into an iPhone dock. Lol Luckily it worked out awesome. Holds it good. Have some close up pics I'll post later when I'm at my other computer. It was a custom build
#18
You definitely gotta post instructions on how to do that! Id love to do that to my camaro
Thread
Thread Starter
Forum
Replies
Last Post