Heres what i need to know im puttin a 10 inch bazooka tube in the lower well of my hatch and i want to mount my amp (phoenix gold M25)In the hatch but out of the way so i can still put my t tops back thereand strap them in.Any suggestions.......

------------------
1987 BLUE IROC
IT'S A DOG
BUT IT'S MY DOG
AND IT HAS A NASTY BITE......
CNYFBA MEMBER
http://cnyfba.cz28.com/

 

im in the proses of making an amp rack that will go right where the rear shade is, there will still be enought room for the ttops,

------------------
Trent
---Car---
89 Firebird
305 L03 TBI A4
t-tops

---Stero---
Pioneer DEH-P730 Premium
Infinity 2way 4652 4x6's
Pioneer 4way ts-a6985 6x9's
profile cl640 110x4
2 pioneer 12" ts-w303c subs (selling if anyone wants em email me)

Future:im profile 1200sx 900watt x 1, and a pioneer cdx-p1270 12 disk cd changer

 

What about ventilation will that be a problem i dont want mt amp to over heat

------------------
1987 BLUE IROC
IT'S A DOG
BUT IT'S MY DOG
AND IT HAS A NASTY BITE......
CNYFBA MEMBER
http://cnyfba.cz28.com/

 

If you want it out of the way and don't use the rear glove box (locking compartment on the drivers side rear quarter) then you can remove the cardboard box that is behind that panel and create an amp rack in that space fairly easily.

I'll be happy to give you some guidance if that is a viable option for you...



------------------
Carl
CarAudio Resources

 

What about the other side where the spear it i have no spear in there and theres a lot of space.....

------------------
1987 BLUE IROC
IT'S A DOG
BUT IT'S MY DOG
AND IT HAS A NASTY BITE......
CNYFBA MEMBER
http://cnyfba.cz28.com/

 

Sure. If you have no spare, then go for it.

There is plenty of airspace back there, so ventillation shouldn't be a problem. That entire area is open all the way up to the doors and up through the sail panels, so don't worry about it overheating if you do that.

You could just make a board that screws down to the frame rail side and have a brace underneath to support it in the open area and mount the amp there. (horizontal between the well and quarter) Just use a good L-Bracket or the like to secure the brace to the bottom of the spare well and then screw the board to the brace.

Does that make sense? It's much easier for me to picture things than it is to describe them.

------------------
Carl
CarAudio Resources