ok guys, as from the last few posts that you guys have been keeping up with.
i was listening to cds lately and thinking....
i cant do kick panels, i need that spot for foot and i want to swap to manual.

so then that leaves me with:
1. Getting fourth gen, and putting two way component in door
2. Get fourth gen, three way set, 6.5 and tweet in door. four in 4x6 location
3. Get fourth gen, three way and mod it for three piece.
4. get two way component set, 4" and tweet and make plate and put in 4x6 location..

it will be amped...

i think i will be running quart's.


Thanx!

------------------
91 FireBird 305 V-8
Edelbrock Catback, Fourth Gen Console. i have six cupholders. all for starbucks!
ghetto rigged cold air intake,
GheTTo Riggers INC.
We Make Mcgyver look Like Crap
God Created The Earth, And Then Turned Up The Bass

Part Search, I NEED A Harness For A Radiator fan, THANX

 

Do shallow kicks. Q-forms stick out a mile, but the ones I built only stick out a couple inches, and I don't think DJSexay's even stick out that much. There are some shallow drivers available, so if you made (or had them made) some custom kicks, I'm sure you could do it with minimal impact on your interior space.

------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
"I didn't know a bored out Ford could go so slow" -Shenandoah

 

is this shallow enough ? These are mine installed in a stick shift car.



mike

------------------
custom 3rd gen kickpanels at http://www.lachernet.com/kickpanels

 

Am I understanding corredctly that you would get a fourth gen for stereo upgrades? I mean that's cool, but how about the added performance? Anyway, I don't think there is a 4"X6" location in a fourth gen. Just the door panels. As for kicks, I ordered DJ Sexay's because of their shallow depth. I had the same concerns with a stick shift. But as you can see in the pic, they easily clear the clutch pedal, and even some on the dead pedal (although, I don't know how usable that is). And can accomidate up to a 2 3/4" depth I believe which is enough for 90% of the 6 1/2" components out there. I'll post when I get mine- can't wait!

------------------
89' Firebird Formula
Black/grey cloth
305 TPI/5 speed/3.45 rear
dual cats/PW,PL/T-tops
K&N, SLP TB booster,
SLP exhaust, Jet chip

 

hey dj you think you can email me that pic, sometimes pics dont come up on my puter, Firebretha@aol.com

Well, i mean id get the door panel, or the lower map pocket with the speaker built in.

Could i do something like the ideas above and then use Dj kicks for show time?
i dunno, im just coming up with ideas,

thnx guys..

 

Whoops! Just read some previous posts- I guess your planning to swap in the door panels only. Sounds like kind of a headache to me, but it would probably be really cool when it's done. Kick panel location would give you better imaging ,though, because it is a more even path for the sound to get to your ears.

------------------
89' Firebird Formula
Black/grey cloth
305 TPI/5 speed/3.45 rear
dual cats/PW,PL/T-tops
K&N, SLP TB booster,
SLP exhaust, Jet chip

 

That's my car pictured above, and actually those aren't even a shallow speaker. The mounting depth of those I believe is 2.75".

- Mike

 

wow.....WOW....


In case you missed, WOW. im impressed. very impressed. and it will give better sound than anything possible in my dash?
im sorry i go around things like that, but im broke.... correction, Im REALLy. Broke. so thats why i always have to be positive what i invest in...

ok. if you guys are sure. thats sounds like a plan, almost.

Dj, How You feeling For Vinyl?

 

ok, and.....

6.5 or 5.25?

my mind says automaticly 6.5 for larger cone size, and i believe it can hit diff ranges...

Thanx guys, i cant wait, stupid stocks.... keep fluctuating so much...

oh, what Component sets do you guys like,

oh, and i will have pics galore. you prob saw my pic frenzy i went on before

 

Well, with tweed, the kicks are ready to cover right out of the mold, since the weave of the tweed hides any little ripples. I'd be interested in doing it, but it will take alittle more time and materials. if you are interested, email me, and we can discuss pricing.

Mike

------------------
custom 3rd gen kickpanels at http://www.lachernet.com/kickpanels

 

- Mike

 

ok, tell me what you think....


PSC216 Front kick pod
PSC216 Rear Sail
Both run off JL audio 300/4
(first question, should i buy two JL's and bi-Amp)
And then Get 500/1 Jl audio for two Eclipse Alum's DVC 4Ohms.
and then later add another 500/1


K, lets say that the PSC216 Are both 310$
and that the 300/4 is 360, and same with the 500/1

and im getting DJ Kicks.