i just went and bought the carb. its the Edelbrock 600 cfm with electric choke. its the economey/street use one. i also bought a braket for the Automatic tranny kickdown and the braket holds the throttle cable. i also bought a vacume assorement plug kit so which ones im not using ill just plug. i was woundering is there anything else i need before i swap the carb onto my engine. the carb came with a gasket, carb studs, wires for the choke and a few other little things. anyone think of anything im missing before i swap the carbs.

is there anything i have to do to the edelbrock before i can start the car when im done? i just hope that this solves my problem but if it doesnt atleast its one thing off my list of things to get.

 

Distributor with mechanical/vacuum advance.

 

my dist. is already set up for vacume advasnts. everything was set up for the vacume adv. when the engine was rebuilt