Cruise Control
Thread Starter
Supreme Member
Joined: Apr 2004
Posts: 1,002
Likes: 0
From: Boscobel, Wisconsin
Car: 1987 Iroc-Z
Engine: 355
Transmission: 700r4 w/ about 7500 miles on rebuild
Cruise Control
Anyone know much about the cruise control? I have a 2.8 MPI and i was wondering if there is an somewhat easy (4 hours or less) way to make the cruise control work with a 357 with a 4bbl carb. Im building a street/strip motor, but i dont know much about cruise especially on a injection engine. If it is integrated into the onboard comp, just let me know because i am going to prolly just take the computer out. Thanx
Joined: Mar 2000
Posts: 43,187
Likes: 43
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
It's integrated with the ECM.
Not sure if it won't work if you keep the ECM powered and the VSS connected. I know mine kept working when I disconnected the distributor and TPS (for experimental purposes only).
Not sure if it won't work if you keep the ECM powered and the VSS connected. I know mine kept working when I disconnected the distributor and TPS (for experimental purposes only).
Joined: Mar 2000
Posts: 43,187
Likes: 43
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Or was it just the TPS I disconnected?
To be honest, I don't remember now. It was about 2 years ago.
To be honest, I don't remember now. It was about 2 years ago.
Thread
Thread Starter
Forum
Replies
Last Post
wigmobile
Electronics
5
Feb 26, 2025 02:56 PM