newbie needs help
Thread Starter
Junior Member
Joined: May 2007
Posts: 3
Likes: 0
newbie needs help
i just got a 86 z28 305, 4barrel. i have a high rise weiand intake and carb adapter, will my car run like **** with that intake and roch. carb. if anybody has a edelbrock carb for cheap let me know, lookin for a 600-650cfm!
thanks -n- advance
thanks -n- advance
Joined: Mar 2000
Posts: 43,187
Likes: 43
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Welcome to thirdgen.org.
Which, specifically, intake do you have? "high rise Weiand" doesn't mean anything.
Most likely, if it won't run well with a stock q-jet, it won't run any better with an Edelbrock. If this is an otherwise stock 305, the wrong "high rise" intake will cause more problems than the stock carb ever will.
(By the way, changing words to get around the Board filter is a violation of Board rules. Please don't get in that habit.)
Which, specifically, intake do you have? "high rise Weiand" doesn't mean anything.
Most likely, if it won't run well with a stock q-jet, it won't run any better with an Edelbrock. If this is an otherwise stock 305, the wrong "high rise" intake will cause more problems than the stock carb ever will.
(By the way, changing words to get around the Board filter is a violation of Board rules. Please don't get in that habit.)
Thread
Thread Starter
Forum
Replies
Last Post
rubblerubble
Transmissions and Drivetrain
18
Mar 13, 2016 06:57 PM