TBI MOD :)
Thread Starter
Junior Member
Joined: Apr 2009
Posts: 73
Likes: 0
From: Oxnard,CA
Car: 91 Rs Camaro
Engine: 305 tbi
Transmission: 700 r4
TBI MOD :)
Ok so I took of my single snorkel for a dual... then that for a open air... now i am going to do this... http://camaroforums.com/forum/showthread.php?t=28278
Any problems with that? Also what do i do with the tube attacked to the bottom left side of the air intake and the tin tube on the head on the right side that went into the snorkel. Also where would be the best place to get a replacement spacer that i took off.
Any problems with that? Also what do i do with the tube attacked to the bottom left side of the air intake and the tin tube on the head on the right side that went into the snorkel. Also where would be the best place to get a replacement spacer that i took off.
Supreme Member
iTrader: (2)
Joined: Jul 2009
Posts: 1,354
Likes: 4
From: morrow, ga
Car: 82 S10, 83 280ZX, 84 Z28
Engine: 355 smallblocks..na, 2.8 turbo
Transmission: 85:th350, 84:700R4
Axle/Gears: 85:ford9 4.85, 84:stock 3.24
Re: TBI MOD :)
only problem with an open element is hot air entering the engine. can caused reduced power and detonation in hot weather. the pcv system: need the pcv valve in one valve cover and a filter in the other.
Thread
Thread Starter
Forum
Replies
Last Post
Glowsock
Tech / General Engine
2
Sep 11, 2015 11:09 PM
