I need to know how you go about checking the TPS on a ccc-quad, I have a digital volt/ohm meter and need to know where to hook it up to (which wires).

I just checked the TPS with my volt meter and got some strange reading: with key on but engine off (at idle 4.38 volts-at WOT .98 volts) tried changes meter leads and got (at idle -4.38 volts - at WOT -.98 volts) whats up with this ??????

need help with this bad !!!!!!!!!!!!!!!!!!!!!!!

What wires are you measuring between?

You should measure from blue (B - output) to black (C - ground).