Cooling Discuss all of the aspects of cooling that you can think of! Radiators, transmissions, electric fans, etc.

Insulation on hood

Thread Tools
 
Search this Thread
 
Old Sep 16, 2003 | 10:54 PM
  #1  
pre's Avatar
pre
Thread Starter
Member
 
Joined: Sep 2003
Posts: 336
Likes: 0
From: Buffalo
Car: 87 Firebird
Engine: 305 LG4
Transmission: THM700R4
Insulation on hood

I got a 87 305 LG4 with lots of mods and i was wondering if I should I rip the insulation off the bottom hood for extra cooling and air flow. If I do will it affect A/C or the paint?
Reply
Old Sep 17, 2003 | 05:33 AM
  #2  
allboutspeed's Avatar
Junior Member
 
Joined: Jul 2003
Posts: 90
Likes: 0
From: Mandarin, Florida
Car: '87 IROC Z-28
Engine: Horse **** 305 for now
Transmission: 700-R4
Axle/Gears: 3.73 posi
The insulation on the inside of your hood does nothing to hamper air flow and the effect on the engine cooling is neglible, all it does is keep the high engine temps from baking the paint on your hood. If it has not already (common) the paint on your hood will certainly fade or even bubble if you do remove the insulation. If you really want more air flow and improved performance by getting cold air, nvest in a cowl induction hood (Harwood).
Reply
Old Sep 17, 2003 | 02:35 PM
  #3  
82camaro's Avatar
Supreme Member
 
Joined: Nov 1999
Posts: 2,860
Likes: 3
From: NE
Car: 82 camaro SC
Engine: 350
Transmission: 700r4
all it does is keep the high engine temps from baking the paint on your hood.


Just remove it. It won't hurt the paint. The paint gets hotter setting in the sun than the engine will get it. I can't think of any problems it will cause. Mine has been gone 9+ years (since I've owned it) and the paint is around 8 years old. No paint fade here. If you want to help airflow, remove the seal on the rear of the hood. A poor-mans cowl induction.
Reply
Old Sep 21, 2003 | 09:51 PM
  #4  
Trans_AM_88's Avatar
Senior Member
 
Joined: Feb 2003
Posts: 847
Likes: 0
From: NJ fo0
Car: 1986/88 Frankenstein Trans Am
Engine: carbed L98
Transmission: T-5
i took mine off too. its just for sound dampening...
Reply
Old Sep 24, 2003 | 09:55 AM
  #5  
Barry85Iroc's Avatar
Senior Member
 
Joined: Jul 1999
Posts: 997
Likes: 0
From: Katy, TX
Car: 1985 IROC Z-28
Engine: 355
Transmission: TH-350
Axle/Gears: 3:73
Mine's gone. No problems.
Reply
Old Oct 4, 2003 | 04:23 PM
  #6  
91GTABird's Avatar
Senior Member
 
Joined: Aug 2001
Posts: 972
Likes: 0
From: Memphis, Tn
Car: 92' RS
Engine: 357
Transmission: TH350
Axle/Gears: 4.10
my car had been wrecked when i got it and i had to put on new bumper, hood, and fenders. The insulation was hanging and getting on my K&N open element, so i pulled it off. Since im poor i temporarly spray painted (black car, easy to match) the front with $0.98 Wal-mart paint. Its been a year since then and the paint looks just fine. As matter of fact at night or on a rainy day you cant tell the difference. Painting it though this winter.
Reply
Old Oct 7, 2003 | 03:05 AM
  #7  
Luke's Avatar
Junior Member
 
Joined: Mar 2001
Posts: 91
Likes: 0
From: phoenix
Car: '86 Camaro
Engine: 2.8 MPFI
Transmission: T-5
when I got into my car wreck and had to buy a new hood I went ahead and got new insulation as well. For all you guys who dont live in the desert it doesnt matter...but when its july and 118* out...you can cook an egg on the side walk in seconds from the hellish sun beating down. I figured that my engine compartment needs all the help it can get to stay cool. I put the insulation in to keep the hood from being an other source of power robbing heat.
Reply
Old Oct 12, 2003 | 10:55 AM
  #8  
wyclefsirocz's Avatar
Supreme Member
 
Joined: Jan 2003
Posts: 1,053
Likes: 0
From: ny-lindy
Car: 1989 Iroc z hardtop
Engine: peanut LB9
Transmission: slopomatic TH700R4
mine is gone but i have some other stuff in its place, i'll come back with pics.
Reply
Old Oct 16, 2003 | 08:16 AM
  #9  
camaro05's Avatar
Senior Member
iTrader: (1)
 
Joined: Oct 2003
Posts: 935
Likes: 0
From: Southern Maryland
Car: 91 Z28
Engine: L98
Transmission: built 700R4
Axle/Gears: 3.42
I took the weather striping out too. not sure what good it really does.
Reply
Old Oct 20, 2003 | 04:04 PM
  #10  
91GTABird's Avatar
Senior Member
 
Joined: Aug 2001
Posts: 972
Likes: 0
From: Memphis, Tn
Car: 92' RS
Engine: 357
Transmission: TH350
Axle/Gears: 4.10
Removed Weather Stripping= Poor Mans Cowl Hood
Reply
Old Oct 28, 2003 | 07:25 PM
  #11  
sqzbox's Avatar
Supreme Member
 
Joined: Jun 2003
Posts: 1,054
Likes: 0
From: Ft. Branch, In.
Car: 88 formula WS6
Engine: 305 Lo3
Transmission: 700-R4
That stuff is a sound deadning dust collector that will reduce the folical count on the top of your head everytime you work under the hood! Besides, the paint under there looks cool every time you raise the hood! Have you ever seen a show car, race car, or anything modified with it on there? NO
Reply
Old Oct 29, 2003 | 07:14 AM
  #12  
ss85tadude's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 528
Likes: 0
From: NorthEast GA
Car: 85 Trans Am
Engine: 305 TPI
Transmission: 700-R4
I just took mine off this weekend when my rad. hose spung a leak and ripped it with the high presure water, It looks much better now.
Reply
Old Oct 29, 2003 | 07:44 AM
  #13  
camaro05's Avatar
Senior Member
iTrader: (1)
 
Joined: Oct 2003
Posts: 935
Likes: 0
From: Southern Maryland
Car: 91 Z28
Engine: L98
Transmission: built 700R4
Axle/Gears: 3.42
Anyone have a pic of thier "new" hood without the junk.
Reply
Old Oct 29, 2003 | 08:06 AM
  #14  
92rsv8's Avatar
Banned
 
Joined: Sep 2002
Posts: 422
Likes: 0
Car: 1992 camaro rs 97 yoyota camry
Engine: lo3 carbed
Transmission: t 5
i removed mine and the weather stripping becausue i have a kn xtreme lid and the insulation was sucking to the top filter!!!! but now i have the ss hood so no problemos.
removing the weather strip alows for the hot air to escape quicker!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jorlain
Exterior Parts Wanted
8
Jun 29, 2017 11:04 PM
91TTOPZ
Exterior Parts for Sale
5
Sep 20, 2016 12:42 PM




All times are GMT -5. The time now is 12:12 AM.