can i fix my condenser?
Thread Starter
Junior Member
Joined: Feb 2003
Posts: 62
Likes: 0
From: queens ny
Car: 92 rs
Engine: 5.0
Transmission: 5 speeds
can i fix my condenser?
my condenser is leaking ,i found the spot where is leaking i was wondering can i fix it, a new one is about $ 180 !! any idea let me know thanxs!!!!
Junior Member
Joined: Jan 2006
Posts: 95
Likes: 0
From: northern maine usa/
Car: 1988 iroc/2000 saab 9-5
Engine: 355 tpi/Roller cam
Transmission: 700r4/2800 stall,megashifter
Axle/Gears: 3;42
Originally Posted by rodrigo diaz
my condenser is leaking ,i found the spot where is leaking i was wondering can i fix it, a new one is about $ 180 !! any idea let me know thanxs!!!!
If the leak is a crack/ in the core, yes you can fix it.
You will need 95.5/ or silver, to repair the leak.
Matters were the leak is/ and how big of a leak.
Junior Member
Joined: Jan 2006
Posts: 95
Likes: 0
From: northern maine usa/
Car: 1988 iroc/2000 saab 9-5
Engine: 355 tpi/Roller cam
Transmission: 700r4/2800 stall,megashifter
Axle/Gears: 3;42
JBWELD,is pretty kool stuff,ive used it, and many others have,
Matters if you solder, id go that route, if not jb may do it also.
Either way, good luck.
Matters if you solder, id go that route, if not jb may do it also.
Either way, good luck.
Junior Member
Joined: Feb 2006
Posts: 74
Likes: 0
From: Rolla,Missouri
Car: 1991 trans am
Engine: 5.0l TPI
Transmission: 700 R4 Auto
Axle/Gears: Don't know... DO U!
ya i'm saying i wanted a quick fix and it was 10 at night. so in the mornin i was able to charge and go!!
Good luck man either way u go
Good luck man either way u go
Thread Starter
Junior Member
Joined: Feb 2003
Posts: 62
Likes: 0
From: queens ny
Car: 92 rs
Engine: 5.0
Transmission: 5 speeds
hey guys forget the condenser it was really corroded so i went to a junkyard and picked one up for $40 i also bought a new acumulator o rings orifice tube , but now i can`t take the acumulator apart the threads are frozen solid and am afraid that if i try to hard i will break the evaporator and just open a can of worms !!! any ideas on how can i take this conections apart???
Thread
Thread Starter
Forum
Replies
Last Post
RedLeader289
Tech / General Engine
10
May 28, 2019 01:47 PM





