Have a Hayden fan control switch on order and I was wondering if anyone has done one that can give a walkthru of what exactly they did. I did a search and found one brief description but it wasn't enough to help me. While I'm mechanically inclined anything related to wiring is pretty foreign to me. I'm hoping someone can tell me step by step what they did. This wire was connected here, ran this wire to here and connected it to this wire etc...

Thanks for any help...

 

might check out this article; there's a free offer for help at bottom of article too

https://www.thirdgen.org/electric_co..._spec_mod_dual

 

Thanks I missed that when I read through tehe article. Sent an e-mail asking for help.

 

No reply to my e-mail. I guess the address is old and no longer monitored.