HVAC control panel question
Thread Starter
Junior Member
Joined: Jun 2008
Posts: 11
Likes: 0
From: Indianapolis, IN
Car: 1985 Z28
Engine: 305 from hell
Transmission: TH350(should e a TH700R-4
Axle/Gears: 3.42, G80
HVAC control panel question
The rotary switch on the back of the HVAC control panel....my son's '92 RS has a BAD vacuum leak at that switch(hisses like a damned cat).
the clear rubber/silicone plug is in good shape, and the plastic lines are free of cracks/tears....the amount of "leak" seems to change as i move the slider from A/C to Vent and such. I pressed on the switch itself, seemed to get quieter as pressure was applied.....of course it went back to what it was when I stopped.
Does GM offer this switch as a replacement part, or is this a non-serviceable item?
the clear rubber/silicone plug is in good shape, and the plastic lines are free of cracks/tears....the amount of "leak" seems to change as i move the slider from A/C to Vent and such. I pressed on the switch itself, seemed to get quieter as pressure was applied.....of course it went back to what it was when I stopped.
Does GM offer this switch as a replacement part, or is this a non-serviceable item?
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Member
Joined: May 2006
Posts: 334
Likes: 1
From: Jupiter, Florida
Car: 92 Z-28
Engine: 305 TPI
Transmission: THM700R4
Axle/Gears: 2.73
Re: HVAC control panel question
Just replaced that on my RS. My a/c was going to the default mode of venting through the defrosters, and it was hissing bad,replaced that part and I am good to go.
Member
Joined: Jul 1999
Posts: 120
Likes: 0
From: Denton, TX
Car: 1992 RS
Engine: 305
Transmission: A/T
Re: HVAC control panel question
Mine does the hissing as well but not the venting only through the defrost area yet and the hvac mode slider also "catches" around the center of the movement and makes a click sound when pushing past it. If I come at heater mode from one direction instead of the other I can make it stop hissing. Do you think this valve replacement is my problem too?
Member
Joined: May 2006
Posts: 334
Likes: 1
From: Jupiter, Florida
Car: 92 Z-28
Engine: 305 TPI
Transmission: THM700R4
Axle/Gears: 2.73
Re: HVAC control panel question
There is a good chance it is the same problem especially if it has not ever been replaced. I would say it is on it's way out. Point is, it is probably falling off the mount it is on and that is why your control lever is hanging up.
Joined: May 2004
Posts: 5,338
Likes: 72
From: Lexington, SC
Car: 1987 SC/1985 TA
Engine: 350/vortec/fitech
Transmission: T56
Axle/Gears: 3.27 9-bolt
Re: HVAC control panel question
I was able to get the AC Delco piece through Rockauto recently and there are discount codes posted here somewhere by the above JamesC. Once you have it out you can check the integrity of each of the vacuum lines connected to it with a MityVac/brake bleeder, which you can 'rent' at AZ or one of the others.
Member
Joined: May 2006
Posts: 334
Likes: 1
From: Jupiter, Florida
Car: 92 Z-28
Engine: 305 TPI
Transmission: THM700R4
Axle/Gears: 2.73
Re: HVAC control panel question
You can also get a discount code from internet sites, just type in RockAuto discount codes, it will at least get you 5% off, I do it everytime I order from them.
Trending Topics
Joined: Jan 2006
Posts: 930
Likes: 6
From: Sweden
Car: 1989 IROC-Z
Engine: 350 TPI
Transmission: Th700R4
Axle/Gears: 3.27
Re: HVAC control panel question
I also have that "hissing" sound sometimes when going to HTR or the "window-mode" to the right. Sometimes its making that "PSSSSSSSSSSSSSSSSSS" sound for like 30secs and then stops.
All other positions is quite, and when I put it from OFF - MAX - NORM etc I hear the AC engage and so..
Could it be that part (16032395) you said thats making the "PSSS" sound in HTR/window mode ?
All other positions is quite, and when I put it from OFF - MAX - NORM etc I hear the AC engage and so..
Could it be that part (16032395) you said thats making the "PSSS" sound in HTR/window mode ?
Joined: Jan 2006
Posts: 930
Likes: 6
From: Sweden
Car: 1989 IROC-Z
Engine: 350 TPI
Transmission: Th700R4
Axle/Gears: 3.27
Re: HVAC control panel question
Thanks I will order one of these to have in the garage, I will look into it this winter when snow falls and the car goes to sleep for the winter..
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
IROCZDAVE (88-L98)
Interior Parts for Sale
4
Oct 6, 2016 09:08 AM









