Need help with ECM swap, different injector wires?
Thread Starter
Member
Joined: Feb 2003
Posts: 205
Likes: 0
From: TEXAS
Car: 1987 Monte Carlo SS
Engine: 5.7L TPI
Transmission: 4 spd auto
Need help with ECM swap, different injector wires?
OK here's the skinny.
On my 870 ECM I have 4 injector pins but they labeled on my diagram as:
D15 - Inj. 1-3-5-7 "A"
D16 - Inj. 1-3-5-7 "A"
D14 - Inj. 2-4-6-8 "B"
C15 - Inj. 2-4-6-8 "B"
On my 730 diagram I have 4 injector pins labeled as:
C11 - Inj. 1-3-5-7
C12 - Inj. 2-4-6-8
D6 - Inj. drive low
D7 - Inj. drive low
Anyone have any ideas as to what goes to what here in the repinning?
On my 870 ECM I have 4 injector pins but they labeled on my diagram as:
D15 - Inj. 1-3-5-7 "A"
D16 - Inj. 1-3-5-7 "A"
D14 - Inj. 2-4-6-8 "B"
C15 - Inj. 2-4-6-8 "B"
On my 730 diagram I have 4 injector pins labeled as:
C11 - Inj. 1-3-5-7
C12 - Inj. 2-4-6-8
D6 - Inj. drive low
D7 - Inj. drive low
Anyone have any ideas as to what goes to what here in the repinning?
Thread
Thread Starter
Forum
Replies
Last Post