I have a 88 GTA 5.0 auto and i ripped out the harness in efforts to convert to carb. ok i know it was a dumb idea b/c i don't even have the engine i'm putting in it done...so anyways i converted the wire harness to carb...meaning i cut the wires up....hardcore, so i went and bought a new harness. this harness is from a 87 gta auto 5.7...i think these are both the same harness except the a/c and the alternator is on oposite sides...right? ok well if it is then i just need to know where all these bad boys go, i can't for the life of me figure out a select few of these connectors...if you need the colors or even pictures of them just lemme know...another thing that would help is routing places for the harness...i know the thickest part will go to the left side then the back of the engine laying on top of the trans. then it goes to the firewall but the little ones branching off i dunno...so i just need pictures of the connections or just descriptions of all the connector positions....i know there's like 20 or more so just a aprox location to the colors of the wires in the connectors maybe? anything to help would be great...

thanks