Are all 727 created equal?
Thread Starter
Member
Joined: Aug 2006
Posts: 229
Likes: 0
From: Doghouse
Car: Pro Stadium Tough Truck
Engine: Buick V6 272 cu in
Transmission: TH350
Axle/Gears: Broken most of the time
Are all 727 created equal?
I have a 727 out of a 90 Lumina and I'm using the pinout from the gmecm site, which is for a Corvette. I labeled all the wires on back of ecm last nigt and noticed some things that cause me concern...
About 80% of the wire colors and gage matched up. The 20% that don't are the problem. The purple and yellow wires for a couple sensors are swapped but the one that causes the most concern is the injector wire for 1, 3, 5, 7. It looks like a 20 gage and is not the correct color. the wire for 2,4,6,8 looks like 18 guage and is also the wrong color.
I read somewhere that GM used the same color wires across models and years. e.g. the temp sensor will always be yellow and black, etc. I am willing to ignore the color difference but the gage could cause problems.
Your thoughts, experiences?? Thanks
About 80% of the wire colors and gage matched up. The 20% that don't are the problem. The purple and yellow wires for a couple sensors are swapped but the one that causes the most concern is the injector wire for 1, 3, 5, 7. It looks like a 20 gage and is not the correct color. the wire for 2,4,6,8 looks like 18 guage and is also the wrong color.
I read somewhere that GM used the same color wires across models and years. e.g. the temp sensor will always be yellow and black, etc. I am willing to ignore the color difference but the gage could cause problems.
Your thoughts, experiences?? Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
Abubaca
Auto Detailing and Appearance
18
Nov 5, 2016 12:22 PM
Saxondale
Exterior Parts for Sale
1
Sep 7, 2015 11:40 AM
