Ignition map for 383 HSR - MegaSquirtII
Thread Starter
Banned
Joined: Jan 2008
Posts: 547
Likes: 0
From: Europe->Poland->Warsaw
Car: 1988 Pontiac Firebird
Engine: 305 LT1 intake&heads
Transmission: TH700r4
Axle/Gears: 3.73 10bolt GM
Ignition map for 383 HSR - MegaSquirtII
engine: 383 HSR, 34lbs@51psi, 165cc heads, cam duration at 050 inch Lift 224 int./230 exh., running on MegaSquirt 2
i have managed to make my car running but rest is totaly crap. can anybody help me to make base ignition map (12x12), rev is at 6000 rpm.
best regards
i have managed to make my car running but rest is totaly crap. can anybody help me to make base ignition map (12x12), rev is at 6000 rpm.
best regards
Supreme Member
Joined: Jul 2005
Posts: 2,123
Likes: 0
From: North Central Mass.
Car: 1985 Berlinetta
Engine: Megasquirted TPI
Transmission: Transgo 700R4
Axle/Gears: 3.42
Re: Ignition map for 383 HSR - MegaSquirtII
I don't think mine would be suitable.
There might be somebody on here that will able to help you.
Anybody running a VE based system with a similar spec should chime in. All he needs are map, rpm, and advance.
Also, map, rpm and VE might be useful for him!
There might be somebody on here that will able to help you.
Anybody running a VE based system with a similar spec should chime in. All he needs are map, rpm, and advance.
Also, map, rpm and VE might be useful for him!
Thread Starter
Banned
Joined: Jan 2008
Posts: 547
Likes: 0
From: Europe->Poland->Warsaw
Car: 1988 Pontiac Firebird
Engine: 305 LT1 intake&heads
Transmission: TH700r4
Axle/Gears: 3.73 10bolt GM
Re: Ignition map for 383 HSR - MegaSquirtII
ok, i see that no body has simmilar setup to mine, but mayb anybody has stock msq file or just stock MSII SparkAdvance table - vex file preffered ??
best regards
best regards
Supreme Member
Joined: Jul 1999
Posts: 1,773
Likes: 7
From: Panama City FL
Car: 87 Iroc
Engine: Turbocharged 5.7 Pro-Fl-XT
Transmission: 700R4 for moment
Axle/Gears: 3.25 9 inch
Re: Ignition map for 383 HSR - MegaSquirtII
I should have something that will help. I can get you close to the stock 8D map from a 5.7 TPI. I'll try to get a look at it tonight and see if I can export the table.
Steve
Steve
Thread Starter
Banned
Joined: Jan 2008
Posts: 547
Likes: 0
From: Europe->Poland->Warsaw
Car: 1988 Pontiac Firebird
Engine: 305 LT1 intake&heads
Transmission: TH700r4
Axle/Gears: 3.73 10bolt GM
Re: Ignition map for 383 HSR - MegaSquirtII
thats better than nothing, thanks
best regards
best regards
Supreme Member
Joined: Jul 1999
Posts: 1,773
Likes: 7
From: Panama City FL
Car: 87 Iroc
Engine: Turbocharged 5.7 Pro-Fl-XT
Transmission: 700R4 for moment
Axle/Gears: 3.25 9 inch
Re: Ignition map for 383 HSR - MegaSquirtII
Sorry for the delay.. I've been trying to fight off the swine flu for the past couple of days... Anyway the rpm range is default 700-6000 and goes up to 100 kpa, so not good for boost. Hope it helps!
Probably will have to right click this and save:
http://www.mentalsocket.com/tpitiming.vex
Probably will have to right click this and save:
http://www.mentalsocket.com/tpitiming.vex
Thread Starter
Banned
Joined: Jan 2008
Posts: 547
Likes: 0
From: Europe->Poland->Warsaw
Car: 1988 Pontiac Firebird
Engine: 305 LT1 intake&heads
Transmission: TH700r4
Axle/Gears: 3.73 10bolt GM
Re: Ignition map for 383 HSR - MegaSquirtII
thanks a milion
best regards
best regards
Thread
Thread Starter
Forum
Replies
Last Post
86CamaroDan
Engine/Drivetrain/Suspension Parts for Sale
2
Sep 29, 2015 10:08 PM
Andrew Prakash
TPI
2
Sep 8, 2015 11:48 AM
