would replacing ecm work?
Thread Starter
Junior Member
Joined: Sep 2009
Posts: 47
Likes: 0
would replacing ecm work?
I have a 92 3.1 L I want to turbo but cant till I can datalog. I have been using autoprom and tunerpro and I've verified everythibg is correct on the software side so now it's looking likes it my car. I have no codes except for airbag light is on. If I do paperwork test it does go into dingostic mode but I have no codes. I'm wondering what could be wrong that my car won't connect to autoprom? Could it be a bad ecm? If so should I buy the same 01227730 or is there an easy/worthwhile upgrade I should look into for turbo setup?
Thanks
Mitch
Thanks
Mitch
Moderator
iTrader: (1)
Joined: Mar 2002
Posts: 18,432
Likes: 233
From: Chasing Electrons
Car: check
Engine: check
Transmission: check
Re: would replacing ecm work?
It could be the ALDL chip in the ECM is bad, it does happen. As for another ECM, for it to be plug & play will need to be a '7730. You will need to swap the MEMCAL over from your current ECM to the new(er) ECM.
RBob.
RBob.
Thread
Thread Starter
Forum
Replies
Last Post
dennisbernal91z
Suspension and Chassis
13
Apr 14, 2016 05:42 AM