what do i need to burn my own chips?
Thread Starter
Senior Member
iTrader: (1)
Joined: Aug 2002
Posts: 542
Likes: 0
From: Haverhill, Ma
Car: Corvette
Engine: 5.7
Transmission: 700R4
what do i need to burn my own chips?
what things do i need to do this?
i will ignore any posts saying search because in my opinion the search on these message boards suck. and i will basically get every single post on the board that says chip in it.
i will ignore any posts saying search because in my opinion the search on these message boards suck. and i will basically get every single post on the board that says chip in it.
Supreme Member
Joined: Jul 1999
Posts: 1,577
Likes: 0
From: Baton Rouge, LA, USA
Car: 87 T/A
Engine: 441 SBC 12.5:1 0.680" Lift
Transmission: T-56
Axle/Gears: 4.10 TruTrac Moser 9"
Did you see the memo about this?
https://www.thirdgen.org/newdesign/tech/promintro.shtml
If you could just read Trax's intro article, that would be greeaaatt...
Yeahhhh...
https://www.thirdgen.org/newdesign/tech/promintro.shtml
If you could just read Trax's intro article, that would be greeaaatt...
Yeahhhh...
Supreme Member
Joined: May 2000
Posts: 2,963
Likes: 3
Car: 1982 Z28
Engine: LS1
Transmission: T56
Originally posted by Craig Moates
If you could just read Trax's intro article, that would be greeaaatt...
Yeahhhh...
If you could just read Trax's intro article, that would be greeaaatt...
Yeahhhh...
(I love it!! Great avatar Craig!)
Senior Member
Joined: May 2001
Posts: 502
Likes: 0
From: Hollywood, FL
Car: 78 Regal
Engine: 82 FBod LG4 305, 730 ECM
Transmission: M20
Axle/Gears: 4.10
Try this exercise. Go to the search feature and use these key words and search only the DIY-PROM board and only search titles.
what to burn chips
prom burning
getting started
Just a few threads show up.
what to burn chips
prom burning
getting started
Just a few threads show up.
Thread
Thread Starter
Forum
Replies
Last Post
KO1
Engine/Drivetrain/Suspension Parts for Sale
16
Oct 15, 2015 05:00 PM