I'm just finishing up a 350 LT4Hotcam motor and 6-speed for a 91 TBI firebird and I'm clueless.......
What programs, programer or what ever is recomended of the 1228746? And NJ Speeder said to ask about lockers program and help or just a point in the right diretion would be welcome thank!!!

 

Lockers is a way to datalog @ 15fps vs winaldl/diacom @0.8fps. It's a great DIYer project. I'm sure RBob will reply. With your setup I sure hope you're running 90# big block injectors and have the rest of the fuel system up to par. What heads are on the motor? Vortecs are pushing at least 400hp, more if you've got a single plane (which I hope if you're keeping TBI).
The 6 speed is nothing, the trick is to just start with the ANLU eprom and make the changes for the stick. If you've got the burning equipment then I can show you the differences and what needs to be changed.

 

I hate to say this but its a big cam in a to small motor the heads are 14102193. do to poor high lift flow I put 1.52 rockers on them and the intake is a ported Edelbrock TBI with a 454 TBI. I would use a single plane but I have to pass inspection, there is no sniffer test but there is a under hood check. I was not sure what injetors to run. I have not got any equipment for burning yet I want to make sure I don't dump my money in to items I will never use.