How Do I Burn My Own Chip??
Thread Starter
Junior Member
Joined: Jan 2002
Posts: 40
Likes: 0
How Do I Burn My Own Chip??
i have an 88 trans am gta with 350 tpi. i was upgrading to a 406 and i want to be able to burn my own chip. what software is used? how much does the hardware cost to get it setup? can i reuse my stock chip? please let me know because it it something that i want to start on soon.
mike
mike
Junior Member
Joined: Apr 2003
Posts: 20
Likes: 0
From: Arkansas, USA
For the basic information on what equipment you need, etc., read HERE
It's not hard or terribly expensive to be able to burn your own PROMs.
Learning to tune so that your PROM's do what you want is the hard part. Read everything you can on these boards and on diy-efi.org. You can download GMECMedit from http://gmecmedit.markmansur.com/ as a free alternative to Tunercat. If you're just working on your 88 GTA, then it will probably do everything you need to do.
Jason
It's not hard or terribly expensive to be able to burn your own PROMs.
Learning to tune so that your PROM's do what you want is the hard part. Read everything you can on these boards and on diy-efi.org. You can download GMECMedit from http://gmecmedit.markmansur.com/ as a free alternative to Tunercat. If you're just working on your 88 GTA, then it will probably do everything you need to do.
Jason
Thread
Thread Starter
Forum
Replies
Last Post
KO1
Engine/Drivetrain/Suspension Parts for Sale
16
Oct 15, 2015 05:00 PM
