If some one that is running a romulator can enlighten me on the specifics, or give a direction on where I can do some research. Do you get to tune in real time? :hail:

 

yes u tune in real time, yes there is lots of info, including here and at tunercat.com(sopftware) and xtronics.com(hardware)


Called doing a search :-) lots of inof u need to dig up, it wont help u at all if u dont understand what is going on in the first place however, so make sure u understand the prom basics and work from there
Jeremy
PS there is liike 3 posts on the main page here alone if im not mistaken

 

I've read through both sites and just want to confirm somthing. With the eprom emulator and the RT tuner there would be no need to invest in the pocket programmer itself right? The emulator is the burner itself in a way?

 

The Romulator is meant as a development tool.
When your done, you should do a prom.

 

Not in a way that can allow you to pull out the RT romulator and run without it.

And even if you decided you were going to leave it in after getting your tune right, you've got the possibility of losing the battery backup and not having any code to run the ECM.

One way around that would be to use the TC RT until you've got the tune sorted, then email your .BIN to someone to burn onto a memcal for you. You can see how this could be done with a memcal adaptor in Trax's PROMINTRO article.

John

 

Okay, thanks for clearing that up. I just got a laptop so I can start doing some scans and thought if I could sidestep the burner and save a little $ I would.