diy-efi
#1
Junior Member
Thread Starter
Join Date: Feb 2003
Location: Texas
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Car: 69 Camaro
Engine: 355 SBC
Transmission: Glide
Axle/Gears: 4.88 full spool
#2
Junior Member
Thread Starter
Join Date: Feb 2003
Location: Texas
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Car: 69 Camaro
Engine: 355 SBC
Transmission: Glide
Axle/Gears: 4.88 full spool
10-8-03
The lists are being turned back on. diy_efi and gmecm are ready to go right now, efi332 and wbo2 will be turned on shortly. I don't have the subscriber lists from the old server, so you'll have to resubscribe yourself by going to the following pages: gmecm or diy_efi If you're on other automotive lists and see questions about the DIY_EFI lists, please spread the word that the lists are back up and running, and the WWW pages and archives will follow shortly.
The lists are being turned back on. diy_efi and gmecm are ready to go right now, efi332 and wbo2 will be turned on shortly. I don't have the subscriber lists from the old server, so you'll have to resubscribe yourself by going to the following pages: gmecm or diy_efi If you're on other automotive lists and see questions about the DIY_EFI lists, please spread the word that the lists are back up and running, and the WWW pages and archives will follow shortly.
#3
Junior Member
Thread Starter
Join Date: Feb 2003
Location: Texas
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Car: 69 Camaro
Engine: 355 SBC
Transmission: Glide
Axle/Gears: 4.88 full spool
The last post was a direct quote from www.diy-efi.org
Thread
Thread Starter
Forum
Replies
Last Post