New Injectors soon to be available
Thread Starter
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
New Injectors soon to be available
While the details are still sketchy about who's going to be selling them, and pricing, be on the look out for some *new* injectors being released.
They are 60 PPH Saturated Port injectors.
Being saturated, no internal ecm modes are needed.
And the code specific part of this is that they are engineered so that you shouldn't have a short PW problem at idle. AND they are pretty linear. I initially started tuning with a calibration for 30 PPH injectors and it ran.
They're kind of easy to spot since they are of the pencil injector design, ie a very thin barrel section.
You can see how thin they are in the attached photo.
They are 60 PPH Saturated Port injectors.
Being saturated, no internal ecm modes are needed.
And the code specific part of this is that they are engineered so that you shouldn't have a short PW problem at idle. AND they are pretty linear. I initially started tuning with a calibration for 30 PPH injectors and it ran.
They're kind of easy to spot since they are of the pencil injector design, ie a very thin barrel section.
You can see how thin they are in the attached photo.
Moderator
Joined: Feb 2000
Posts: 7,015
Likes: 2
From: Schererville , IN
Car: 91 GTA, 91 Formula, 89 TTA
Engine: all 225+ RWHP
Transmission: all OD
Axle/Gears: Always the good ones
glad to see those worked out for you bruce...
wondering how much $$$$$$$$$$$ they will hit us for now lol
im covered for awhile on the F-bods cept the TTA....hmmmmmmmmmmmmmmmm lol
later
Jeremy
wondering how much $$$$$$$$$$$ they will hit us for now lol
im covered for awhile on the F-bods cept the TTA....hmmmmmmmmmmmmmmmm lol
later
Jeremy
Thread Starter
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
Their hoping to keep them very reasonable.
First word is less then the P+H, which in that size are about $60 a pop.
First word is less then the P+H, which in that size are about $60 a pop.
Thread
Thread Starter
Forum
Replies
Last Post
thejimsterz28
Engine/Drivetrain/Suspension Parts for Sale
4
Sep 15, 2015 04:37 PM