Giggles and grins, Firehawk .bins
Thread Starter
Moderator
Joined: Feb 2000
Posts: 7,015
Likes: 2
From: Schererville , IN
Car: 91 GTA, 91 Formula, 89 TTA
Engine: all 225+ RWHP
Transmission: all OD
Axle/Gears: Always the good ones
Giggles and grins, Firehawk .bins
Looks like I have a real shot at getting a firehawk bin copied from a car.
These do use an adapter and a second chip correct. Never checked in person. Just making sure I dont have to make a memcal adapter to read it
thanks
Jeremy
These do use an adapter and a second chip correct. Never checked in person. Just making sure I dont have to make a memcal adapter to read it
thanks
Jeremy
Member
Joined: Nov 2003
Posts: 462
Likes: 1
From: Ft. Leavenworth, KS
Car: 83 TA, 89 TTA, others
Engine: ZZ4 TPI, LC2 turbo v6
Transmission: several, mostly broken
Re: Giggles and grins, Firehawk .bins
Originally posted by 3.8TransAM
Just making sure I dont have to make a memcal adapter to read it
Just making sure I dont have to make a memcal adapter to read it
Making one costs what, like two bucks?
You'll probably use it again, sooner or later.
Joined: Apr 2004
Posts: 3,180
Likes: 3
From: Browns Town
Car: 86 Monte SS (730,$8D,G3,AP,4K,S_V4)
Engine: 406 Hyd Roller 236/242
Transmission: 700R4 HomeBrew, 2.4K stall
Axle/Gears: 3:73 Posi, 7.5 Soon to break
Intrest has peaked!
I have trying to find what the broadcast code was for those and if anyone had the bin. Cool!
I have trying to find what the broadcast code was for those and if anyone had the bin. Cool!
My old Firehawk, #003, used the 730 with a standard MEM-CAL with simply a custom bin, the PROM chip had a white sticker with a hand written code. Same for the old SLP chip from my 92 GTA...
Thread
Thread Starter
Forum
Replies
Last Post