27c512 vs AT29c512
Thread Starter
TGO Supporter
Joined: Jan 2003
Posts: 524
Likes: 0
From: Australia
27c512 vs AT29c512
I am part way thru a '7747 to '8625 PCM swap in my TBI car.
This thing uses 'bins that are 64k, so I assumed they must be a 27c512...
I went thru my old eprom box and was very suprised to see that my 27c512's are 28pin , but the AT29c512 that I was going to solder into the memcal is 32 pin!!!!
I thought these 27cXXX proms were interchangeable with AT29cXXX????
What 64k eeproms do I need to use in place of the 27c512?
TIA,
Ben.
This thing uses 'bins that are 64k, so I assumed they must be a 27c512...
I went thru my old eprom box and was very suprised to see that my 27c512's are 28pin , but the AT29c512 that I was going to solder into the memcal is 32 pin!!!!
I thought these 27cXXX proms were interchangeable with AT29cXXX????
What 64k eeproms do I need to use in place of the 27c512?
TIA,
Ben.
Supreme Member
Joined: Aug 1999
Posts: 2,441
Likes: 1
From: sweden
Car: GTA -89
Engine: Blown 415"
Transmission: 4L80E
Axle/Gears: Strange 12-bolt
Senior Member
Joined: Oct 1999
Posts: 6,621
Likes: 2
Car: 91 Red Sled
Axle/Gears: 10bolt Richmond 3.73 Torsen
Originally posted by ben73
hmmm, I don't think my PP1 supports that SF chip ;-(
Maybe its time for a prominator pro ;-)
hmmm, I don't think my PP1 supports that SF chip ;-(
Maybe its time for a prominator pro ;-)
As for the different pins, I thought they were all 28 pins.
Thread
Thread Starter
Forum
Replies
Last Post
