s-aujp Download
#1
Senior Member
Thread Starter
Join Date: Apr 2004
Location: Calif
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
Car: 75 Vette
Engine: 406 TPI
Transmission: 700 R-4
Axle/Gears: 373
s-aujp_V3 Download
Using tunerpro
how do I get the extended VE table to show
how do I get the extended VE table to show
Last edited by 1tpi; 05-07-2005 at 08:14 PM.
#2
If using pre 4.0, the Super8dm_2.ecu or close will show 3 VE
tables. Not sure if an xdf is out yet for 4.0.
You also need to be using S_AUJP v3 to get the extended tables.
You can also edit your current ecu to show that table.
There's a how to on the TP site. And the extended VE2 table starts at $9003. Or $1003 for the start address for your ecu.
tables. Not sure if an xdf is out yet for 4.0.
You also need to be using S_AUJP v3 to get the extended tables.
You can also edit your current ecu to show that table.
There's a how to on the TP site. And the extended VE2 table starts at $9003. Or $1003 for the start address for your ecu.
Thread
Thread Starter
Forum
Replies
Last Post