I have a '91 Camaro Z28 and the only thing that I have done to is so far is put a new 2 1/2 in. pipe to a 40 series Flowmaster and out of that to 3 in. tips. I have everything else stock and I am contemplating putting a bigger cam, lifters, springs and rods in the 305. It was mentioned to me that I should just replace the chip and not do anything to the cam and that the chip would free up a good enough amount of horsepower. I don't want to do anything really major to the 305 because I will be buying a 350 from a friend of mine and will keep the 305 for backup. What I want to know is ;

Is there anyplace I could buy a chip that was already burned for my car or do I have to burn my own?
What else would I have to do to make sure the car is doing what the new chip is telling it to do?

Thanks in advance

Kenneth

 

This is the DIY (DIY = Do-It-Yourself) PROM board. [Learn to] Burn your own chips or don't waste your money.

 

Burn your own. It will quickly become apparent to you that no one can burn a chip for your motor, with out having it right there. Everyones set up is different. (even two stock set ups are different.) Anyone that claims they can burn you a "Custom" chip, specifically for your motor, is lieing.

 

What else would I have to do to make sure the car is doing what the new chip is telling it to do?

datalog with winALDL or tunerpro rt 4.0. you will need a laptop and aldl cable.

bonus points given for a WB 02 for the AE-PE stuff.