Which BIN should I start with?
Thread Starter
Member
Joined: Jan 2001
Posts: 269
Likes: 0
From: Beyond Hope
Which BIN should I start with?
Here's what I got: 1993 C1500, 92 TPI with a speed density ECM(730), 4L60E tranny.
I am using the trucks original ECM to control the transmission, so what BIN should I use as a starting point for my engine tuning? I am leaning towards one from a manual car, but thought I would ask around first.
------------------
1993 C1500 Indy 500 Edition
1992 TA TPI setup
Stock motor, new one being built now.
www.geocities.com/wsleigh
I am using the trucks original ECM to control the transmission, so what BIN should I use as a starting point for my engine tuning? I am leaning towards one from a manual car, but thought I would ask around first.
------------------
1993 C1500 Indy 500 Edition
1992 TA TPI setup
Stock motor, new one being built now.
www.geocities.com/wsleigh
Joined: Jul 1999
Posts: 10,950
Likes: 26
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
AUJP for a 92 350 TPI. You'll need some other computer to control the 4L60E.
------------------
West Coast GM Shootout 2001!
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.25 @ 107.18 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-
------------------
West Coast GM Shootout 2001!
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.25 @ 107.18 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-
Thread
Thread Starter
Forum
Replies
Last Post