Guys, i realize the vettes came with SD from 90-91 and they also came with the 350/6speed combo. Could i get a bin from a 90-91vette and use it in my 730/727 compatable computer? And if so, where can i get one? I looked briefly over the DIY-EFI ftp but was unable to find one(helps if i knew what i was looking for).

Thanks,

Brendan

------------------
1987 IROC-Z L98,SuperRam,EB 6085's,LPE 219/219 Roller, Crane 1.6RR, EB TPI Base, 58mm TB, ADS 24#, AFPR, K&N, EB TES, Catco Cat, 3" Borla Cat-Back, Accel cap,rotor,distro/other crap, MSD 6AL, MSD Blaster 3, Aluminum DS, 94 Disk Rear, Adjustable Valve, Precision 3.73 Gears, Sub-Frame Connectors, Hotchkis Lower Control Arms, KYB Shocks/Struts, Suspension Techniques Lowering Springs, Polyurethan Bushings all over the place, Moog Upper/Lower Ball joints and Tie Rods ends/Idler Arm,

To see the ROC, Check out the webpage Here

 

Do you want the 6 speed bin, or the auto bin? The auto bin is ANHT, and you can find it in the gmecm bin library. The 6 speed bin is out there in the same directory, but I'm too lazy to look it up right now.

------------------
408cid 1985 Corvette
http://www.mojosgarage.com

 

hahaha, I want the 6speed bin, i have a T5 and i NEED a manual bin to start with or atleast compare with. I found the auto bin but i don't know what the manuals bin is.

 

Okay, sorry it took so long. My firewall doesn't always let me go to the FTP sites. I believe it's ANJF.

 

I used a Corvette BIN in my Camaro for a while, and I would get Code 52 on the highway every time. The Corvette has an oil temp gauge that the Camaro doesnt have, and the computer would set the code that it couldnt find it. You'll need to turn off that code, because I dont know how. I switched back to a Camaro chip.

------------------
West Coast GM Shootout 2001!
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.23 @ 107.62 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-

 

I'll have to see if i can disable that oil temp switch problem. Can anybody confirm that the ANJF is the correct bin for the vette 6speed?

------------------
1987 IROC-Z L98,SuperRam,EB 6085's,LPE 219/219 Roller, Crane 1.6RR, EB TPI Base, 58mm TB, ADS 24#, AFPR, K&N, EB TES, Catco Cat, 3" Borla Cat-Back, Accel cap,rotor,distro/other crap, MSD 6AL, MSD Blaster 3, Aluminum DS, 94 Disk Rear, Adjustable Valve, Precision 3.73 Gears, Sub-Frame Connectors, Hotchkis Lower Control Arms, KYB Shocks/Struts, Suspension Techniques Lowering Springs, Polyurethan Bushings all over the place, Moog Upper/Lower Ball joints and Tie Rods ends/Idler Arm,

To see the ROC, Check out the webpage Here

 

My info shows it as an auto

 

Bruce,
Do you know which is for the 90-91 vette 6speed?

 

ARFP7185 is a 90 Vette 5.7 Manual Bin.

 

Thanks Glenn