OK, I have read the article and am slowly testing the waters of this burning stuff. My question is simple, can I buy an aftermarket chip and piggyback off it from any GM vehicle, or does it have to be a F-body. Can I buy one for a truck, since I am just using it as a go between? Is there a cross reference site to check out which proms will work?

Thanks
Jeremy

------------------
WE WILL MISS YOU #3
92 Z conv
5-spd B&M shifter
home-made ram air, air foil, headers, no cat, TB bypass, kevlar pads, slotted rotors, BMR panhard, alston SFC, 3.42's, Edelbrock STB, 350 in the works

 

You need to be a tad bit more specific.
Like what truck?.
Till 91 they used one system, then 92-95 another, and 96+ another.
There is the bin library at DIY-EFI, but again need to know what your working on.

 

I have a 92 Z TPI car, and on ebay, they sell the chips for other vehicles pretty cheap. I guess I need to find out where to look to find out what works and what not.

Thanks
Jeremy

------------------
WE WILL MISS YOU #3
92 Z conv
5-spd B&M shifter
home-made ram air, air foil, headers, no cat, TB bypass, kevlar pads, slotted rotors, BMR panhard, alston SFC, 3.42's, Edelbrock STB, 350 in the works