I was thinking the 27 series eprom are pretty much a legacy part so I know there are lots of people out there who have built thier own eprom burners so my question is has any one stumbeled across any good info on plans and software to build thier own eprom burner


if no one has I will continue to search till I find some thing or get ambitios enuf to design my own

at any rate I will provide detailed plans on my website when i get it working for any one else who may also want to go this route

------------------
Objects in mirror are more stable than they appear
www.members.home.com/v8power
4BBL to TPI in the works
86 350 5spd custom made weld in subframe

 

I think building your own burner is out of the scope for this forum, I can however mail you some links I have found on the subject.

But I am sure you will find plenty of plans for eprom burners if you search with www.google.com or www.altavista.com


------------------
ZaphodB a.k.a Carl Andersson - zaphodb@faxancruisers.org
'89 Camaro IROC-Z 5.7L TPI - Mods under construction :-)
Custom ARAP Chip Under Development/180 t-stat, Edelbrock TES Headers,
SLP Airfoil, K&N Filters, Accel 8mm wires, Relocated MAT, AFPR @ 45 PSI