what should IAC counts be
what should IAC counts be
I am trying to get my idle working
I noticed my iac counts are zero at idle(which is idling high)
so if a close the throttle my counts shoud start going up at some point correct?
so what is a good IAC count value to see at full temp idle 750 RPM?
------------------
1986 IROC 350 5spd
just installed a TPI from a 1988 IROC, 24# lt1 injectors,165 ECM MAF, custom sub frame
I noticed my iac counts are zero at idle(which is idling high)
so if a close the throttle my counts shoud start going up at some point correct?
so what is a good IAC count value to see at full temp idle 750 RPM?
------------------
1986 IROC 350 5spd
just installed a TPI from a 1988 IROC, 24# lt1 injectors,165 ECM MAF, custom sub frame
<font face="Verdana, Arial" size="2">Originally posted by v8power:
I am trying to get my idle working
I noticed my iac counts are zero at idle(which is idling high)
so if a close the throttle my counts shoud start going up at some point correct?Yes, correct
so what is a good IAC count value to see at full temp idle 750 RPM? I set mine for about 30 counts with good results.
</font>
I am trying to get my idle working
I noticed my iac counts are zero at idle(which is idling high)
so if a close the throttle my counts shoud start going up at some point correct?Yes, correct
so what is a good IAC count value to see at full temp idle 750 RPM? I set mine for about 30 counts with good results.
</font>
------------------
86 406
Thread
Thread Starter
Forum
Replies
Last Post






