which knock sensor?
Thread Starter
Junior Member
Joined: Oct 2005
Posts: 48
Likes: 0
From: Camano Island, WA
Car: For this site, 91 Caprice wagon
Engine: 350 from an 88 truck
Transmission: 700r4
which knock sensor?
I swapped out the POS 305 for a .030 350, with the edelbrock MPFI (still trying to get it to run), and have the stock sensor. What tells me which one to use? Is it soley displacement based? I have a re-pinned 7730 with an AUJP memcal.
More requests to come......
Darryl
More requests to come......
Darryl
Joined: Mar 2000
Posts: 5,713
Likes: 133
From: Orange, CA
Car: '90 Trans Am-12.45@110.71
Engine: 355 w/AFR 195's Elem. 400/430 HP/TQ
Transmission: Tremec T-56
Axle/Gears: 12 Bolt 3.73
Re: which knock sensor?
AC...10456549
It's a 350 for the AUJP
It's a 350 for the AUJP
Supreme Member
Joined: Jan 2007
Posts: 1,873
Likes: 0
From: OC CA
Car: 75 Beast
Engine: 383 +EBL Flash
Transmission: 700R4
Axle/Gears: 4.11 with 33"
Re: which knock sensor?
Wagon
Which cam do you have in your 350??? Knock sensors are also tuned for camshafts - roller vs. flat tapet in addition to displacement.
//RF
Which cam do you have in your 350??? Knock sensors are also tuned for camshafts - roller vs. flat tapet in addition to displacement.
//RF
Thread Starter
Junior Member
Joined: Oct 2005
Posts: 48
Likes: 0
From: Camano Island, WA
Car: For this site, 91 Caprice wagon
Engine: 350 from an 88 truck
Transmission: 700r4
Re: which knock sensor?
Flat tappet, very mild RV. I'm reasonably sure the stock one will be fine. I'm not pushing this thing hard, or even setting it up to where detonation will be a real issue. Its going to be the wifes car, when I'm satisfied enough with its reliability and performance.
It would be interesting to see a spreadsheet, though.
Thanks!
It would be interesting to see a spreadsheet, though.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
FormulasOnly
Tech / General Engine
3
Sep 10, 2015 09:07 PM