how do i take fuel out of cold start
Thread Starter
Senior Member
Joined: May 2002
Posts: 569
Likes: 0
From: concord New Hampshire
Car: 87 iroc and 88 k2500 tbi truck
Engine: l98 and lo5
Transmission: 700 r4's babby
how do i take fuel out of cold start
I am running a 747 ecu and the motor is way too rich at cold temps what is the setting that i need to pull it out of?
Joined: Mar 2006
Posts: 4,367
Likes: 15
Car: 1973 Datsun 240Z/ 1985 S-15 Jimmy
Engine: Turbo LX9/To be decided
Transmission: 5-speed/T-5
Axle/Gears: R200 3.90/7.5" 3.73
Re: how do i take fuel out of cold start
I'm listening in, as I'm working with a 7747 in a friends truck, and cold start isn't all that great right now, I feel it may be due to a rich condition.
What program, bin, xdf/ecu are you using?
I'm using Tuner Pro RT, ACSC (IIRC) and a converted 7747_mine to do my adjustments through an Ostrch 2.0. Was able to take it for a drive today, after some successful tuning.
Does yours need a feathering of the throttle to continue to run until a little warm?
What program, bin, xdf/ecu are you using?
I'm using Tuner Pro RT, ACSC (IIRC) and a converted 7747_mine to do my adjustments through an Ostrch 2.0. Was able to take it for a drive today, after some successful tuning.
Does yours need a feathering of the throttle to continue to run until a little warm?
Thread Starter
Senior Member
Joined: May 2002
Posts: 569
Likes: 0
From: concord New Hampshire
Car: 87 iroc and 88 k2500 tbi truck
Engine: l98 and lo5
Transmission: 700 r4's babby
Re: how do i take fuel out of cold start
I'm listening in, as I'm working with a 7747 in a friends truck, and cold start isn't all that great right now, I feel it may be due to a rich condition.
What program, bin, xdf/ecu are you using?
I'm using Tuner Pro RT, ACSC (IIRC) and a converted 7747_mine to do my adjustments through an Ostrch 2.0. Was able to take it for a drive today, after some successful tuning.
Does yours need a feathering of the throttle to continue to run until a little warm?
What program, bin, xdf/ecu are you using?
I'm using Tuner Pro RT, ACSC (IIRC) and a converted 7747_mine to do my adjustments through an Ostrch 2.0. Was able to take it for a drive today, after some successful tuning.
Does yours need a feathering of the throttle to continue to run until a little warm?
Thread
Thread Starter
Forum
Replies
Last Post
