hi i have sent the last few nights transfering everything over from my bin to saujp v4

i burned the chip verifyed /buffer

put the chip in loaded the ads file (i would use scannerpro but it locks up)

start it up and it idles no check engine light i'm showing everything i should be but not rpm and i tried looking at rpm/12.5, rpm/25/rpm/32.5

i also tried loggng w/ a normal 730 ads and no rpm either

put my old bin back in and everything logs

 

That's odd.
The only one you need to change anything for is the 31.25 reading,
(Word 25 changes to be address 0149 instead of CMD Idle speed of 0112)
Don't know why you have that issue. TP version at least 4.14?

 

tp is 4.14

 

tp is 4.14

question

the default setting for cylinder # is 0 on saujp v4

normally it is 8

could changing it cause this?

 

For a v8. 0 is correct.

 

o....k.... it works now










i feel stupid....

 

We all do at some point with this stuff.

For future reference,
4 cyl = $80
6 cyl = $C0
8 cyl = $00

Live and Learn