Need a stock 302 bin and mask

Reply Subscribe

Thread Tools

Search this Thread

Jan 10, 2010 | 08:44 PM

86ttopbird

Thread Starter

Senior Member

Joined: Sep 2009

Posts: 354

Likes: 1

From: Manchester,PA

Car: 86 Firebird SE

Engine: 2.8L

Need a stock 302 bin and mask

I dont have the ability to get the stock bin off a 302 ECM. What I need is the stock 302 bin and code mask that an 86 2.8 V6 Firebird would have come stock with. I am sure I could dig them up if i knew what to look for.

Jan 11, 2010 | 02:56 PM

Ronny

TGO Supporter

iTrader: (1)

Joined: Mar 2003

Posts: 6,880

Likes: 4

From: wisconsin

Re: Need a stock 302 bin and mask

check craig moates website under downloads.

Jan 11, 2010 | 09:31 PM

86ttopbird

Thread Starter

Senior Member

Joined: Sep 2009

Posts: 354

Likes: 1

From: Manchester,PA

Car: 86 Firebird SE

Engine: 2.8L

Re: Need a stock 302 bin and mask

That was one of the places I checked but could not figure out what code mask is used.

Jan 12, 2010 | 07:46 AM

RBob

Moderator

iTrader: (1)

Joined: Mar 2002

Posts: 18,432

Likes: 233

From: Chasing Electrons

Car: check

Engine: check

Transmission: check

Re: Need a stock 302 bin and mask

Quote:

Originally Posted by 86ttopbird

That was one of the places I checked but could not figure out what code mask is used.

The maskid is $3A for the '7302 in 3rd gens.

You can also use WinALDL with the '7302 ECM as it is a 160 baud data stream.

RBob.

Jan 12, 2010 | 06:08 PM

86ttopbird

Thread Starter

Senior Member

Joined: Sep 2009

Posts: 354

Likes: 1

From: Manchester,PA

Car: 86 Firebird SE

Engine: 2.8L

Re: Need a stock 302 bin and mask

thanks alot RBob!!!

Jan 12, 2010 | 08:40 PM

86ttopbird

Thread Starter

Senior Member

Joined: Sep 2009

Posts: 354

Likes: 1

From: Manchester,PA

Car: 86 Firebird SE

Engine: 2.8L

Re: Need a stock 302 bin and mask

Ok found the .xdf. One problem though. All the temperatures are in degrees Celsius. Shouldnt they be in Farenheit? I know you can edit XDF's in Tunerpro but I notice when i do, the temps in the graph do not change. Theres a big difference between 60 degrees Celsius and 60 degrees Farenheit. Am I missing something?