Need TPI bin file.
04-23-2010, 06:02 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2007
Location: Norway
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Chevrolet Camaro SC
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 3.42
Need TPI bin file.
Hi there..
Have just finished my engine after a complete overhaul.
Have done some modifications so I need to burn a new chip.
Is here anyone that knows a link to a 6E BIN file for a MAF - 305 engine?
The only thing I can find on Moates and several sites are for 350 engines.
Have just finished my engine after a complete overhaul.
Have done some modifications so I need to burn a new chip.
Is here anyone that knows a link to a 6E BIN file for a MAF - 305 engine?
The only thing I can find on Moates and several sites are for 350 engines.
04-23-2010, 06:12 PM
#2
Moderator
iTrader: (1)
Join Date: Mar 2002
Location: Chasing Electrons
Posts: 18,401
Likes: 0
Received 215 Likes
on
201 Posts
Car: check
Engine: check
Transmission: check
Re: Need TPI bin file.
Hi there..
Have just finished my engine after a complete overhaul.
Have done some modifications so I need to burn a new chip.
Is here anyone that knows a link to a 6E BIN file for a MAF - 305 engine?
The only thing I can find on Moates and several sites are for 350 engines.
Have just finished my engine after a complete overhaul.
Have done some modifications so I need to burn a new chip.
Is here anyone that knows a link to a 6E BIN file for a MAF - 305 engine?
The only thing I can find on Moates and several sites are for 350 engines.
http://www.eecis.udel.edu/~davis/z28/
RBob.
04-24-2010, 04:13 AM
#3
Senior Member
Thread Starter
Join Date: Mar 2007
Location: Norway
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Chevrolet Camaro SC
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 3.42
Re: Need TPI bin file.
Thanks alot
...I will try on of those out.What are the main differences on a 350 and a 305 when it comes to programming??
03-16-2017, 04:17 PM
#4
Junior Member
Re: Need TPI bin file.
Any suggestions for a bin ?
87 5.7 (tpi originally), 700r4 auto, 24lb injector , 160 stat, vortec heads, stealth ram intake
87 5.7 (tpi originally), 700r4 auto, 24lb injector , 160 stat, vortec heads, stealth ram intake
03-16-2017, 05:04 PM
#5
Re: Need TPI bin file.
Aujm with a custom timing table fan switch changed to nc.
http://www.gearhead-efi.com/Fuel-Inj...Information-6E
http://www.gearhead-efi.com/Fuel-Inj...Information-6E
Last edited by Tuned Performance; 03-16-2017 at 05:06 PM. Reason: Link
10-13-2022, 09:09 AM
#6
Junior Member
Re: Need TPI bin file.
Ok, still getting used to the tuner pro software. I think I was using the wrong xdf. Which one should I use for my setup?
and then the the adx file is used for logging correct? Which one of those should I use?
and then the the adx file is used for logging correct? Which one of those should I use?
Trending Topics
10-13-2022, 09:45 AM
#8
Junior Member
Re: Need TPI bin file.
Also, on the spark tables I'm seeing that they only have rpm values up to 4800. Is there a way to add to that since the stealth ram pulls much higher than that or does it not matter?
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM
