so ive been ready on how to mod a bin and change a buch of stuff.... lots of info out there. my question is i take a stock bin from moates.net 7747 arht.bin and do nothing to it, not change a thing. when i go to program it with my auto prom i make sure the 27sf512 is blank and it is, i then load it to the buffer & program chip, & verify it. i come up with no errors when programming but as soon as i install back into vehicle the ses light flashing in limp home mode is there anything im doing wrong? thanks guys for any

 

forgot, ill double check the offsets too

 

That would be my first guess.

 

checked offsets, correct for 4k

 

anything?