OK I have the Autoprom all hooked up. I have a good memcal and tested it with an AT29C256 chip with my current bin loaded in. I removed the chip and plugged in the emulator. I load the bin and XDF file in tunerpro and upload it to the Autoprom and verify it. When I turn on the key, the fans come on and its in diagnostic mode. I have tried a number of combination's and its all the same.

Can someone help me out? Is this a checksum issue?

Thanks,

Jason

 

I just tried it with TunercatRT and it worked great. I'm not sure what the issue is with Tunerpro.